XCF16PVOG48C

Product Overview

• Category: Integrated Circuit (IC)
• Use: Memory device
• Characteristics: High capacity, non-volatile, programmable
• Package: 48-pin Very Thin Small Outline Package (VTSOP)
• Essence: Non-volatile memory storage
• Packaging/Quantity: Individually packaged, quantity per package varies

Specifications

• Memory Capacity: 16 Megabits (2 Megabytes)
• Organization: 2,048 pages of 8,192 bytes each
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Interface: Serial Peripheral Interface (SPI)
• Write Endurance: 100,000 cycles
• Data Retention: 20 years

Pin Configuration

The XCF16PVOG48C has a total of 48 pins. The pin configuration is as follows:

1. VCC: Power supply voltage
2. GND: Ground
3. HOLD: Suspends serial communication temporarily
4. WP: Write protect input
5. SCK: Serial clock input
6. SI: Serial data input
7. SO: Serial data output
8. CS: Chip select input 9-48: Address and data pins

Functional Features

• Non-volatile memory: Retains data even when power is disconnected
• Programmable: Allows users to write and erase data multiple times
• High capacity: Stores up to 16 Megabits of data
• Serial interface: Uses SPI for easy integration with microcontrollers
• Low power consumption: Operates on a low supply voltage range

Advantages and Disadvantages

Advantages

• High memory capacity
• Non-volatile storage
• Easy integration with microcontrollers
• Low power consumption

Disadvantages

• Limited write endurance (100,000 cycles)
• Relatively small package size

Working Principles

The XCF16PVOG48C is based on Flash memory technology. It utilizes a floating gate transistor structure to store and retain data. When programming, a high voltage is applied to the control gate, allowing electrons to tunnel through the insulating layer and get trapped in the floating gate. This alters the threshold voltage of the transistor, representing a programmed state. Erasing is achieved by applying a higher voltage that removes the trapped electrons, returning the transistor to an erased state.

Detailed Application Field Plans

The XCF16PVOG48C is commonly used in various applications that require non-volatile memory storage. Some potential application fields include:

1. Consumer Electronics: Used in digital cameras, portable media players, and gaming consoles for data storage.
2. Automotive: Employed in car infotainment systems, instrument clusters, and engine control units for storing critical data.
3. Industrial Automation: Integrated into programmable logic controllers (PLCs), human-machine interfaces (HMIs), and industrial control systems.
4. Medical Devices: Utilized in medical equipment such as patient monitors, infusion pumps, and diagnostic devices for data storage.
5. Communication Systems: Incorporated into routers, switches, and network equipment for configuration and firmware storage.

Detailed and Complete Alternative Models

1. XCF32PVOG48C: 32 Megabit (4 Megabyte) capacity, same pin configuration and package as XCF16PVOG48C.
2. XCF64PVOG48C: 64 Megabit (8 Megabyte) capacity, same pin configuration and package as XCF16PVOG48C.
3. XCF128PVOG48C: 128 Megabit (16 Megabyte) capacity, same pin configuration and package as XCF16PVOG48C.

These alternative models offer higher memory capacities while maintaining compatibility with the XCF16PVOG48C in terms of pin configuration and package.

Note: The above content is a sample structure for an encyclopedia entry and may not reflect actual specifications or details of any specific product.