Vishay Semiconductor Diodes Division
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
VLZ5V1-GS08
Ver detalhes DataSheets

VLZ5V1-GS08

Introduction

The VLZ5V1-GS08 is a semiconductor product belonging to the category of voltage regulator ICs. This device is commonly used in electronic circuits to regulate and stabilize voltage levels, ensuring consistent and reliable power supply to other components.

Basic Information Overview

  • Category: Voltage Regulator IC
  • Use: Stabilizing and regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: SOT-23-5
  • Essence: Ensuring stable voltage supply
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.0V
  • Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND (Ground)
  2. VOUT (Output Voltage)
  3. NC (No Connection)
  4. VIN (Input Voltage)
  5. EN (Enable)

Functional Features

  • High Precision: Provides accurate and stable output voltage
  • Low Dropout Voltage: Minimizes power loss and heat dissipation
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact SOT-23-5 package
  • Low dropout voltage for efficient power management

Disadvantages

  • Limited output current capacity
  • Narrow input voltage range

Working Principles

The VLZ5V1-GS08 operates by comparing the reference voltage with the feedback voltage to adjust the output voltage, ensuring it remains constant despite fluctuations in the input voltage.

Detailed Application Field Plans

This voltage regulator IC is widely used in portable electronic devices, battery-powered systems, and low-power applications where maintaining a stable voltage supply is critical for proper operation.

Detailed and Complete Alternative Models

  • LM1117MPX-3.3/NOPB: Similar voltage regulator IC with a higher output voltage of 3.3V
  • XC6206P332MR-G: Low dropout voltage regulator with a smaller SOT-23 package

In conclusion, the VLZ5V1-GS08 voltage regulator IC offers precise and reliable voltage regulation in a compact package, making it suitable for various low-power electronic applications.

[Word Count: 366]

Liste 10 perguntas e respostas comuns relacionadas à aplicação de VLZ5V1-GS08 em soluções técnicas

  1. What is the VLZ5V1-GS08?

    • The VLZ5V1-GS08 is a voltage level shifter designed to convert signals between different voltage levels in technical solutions.

  2. What voltage levels does the VLZ5V1-GS08 support?

    • The VLZ5V1-GS08 supports shifting between 1.8V and 5V logic levels, making it suitable for interfacing between different types of devices.

  3. How do I connect the VLZ5V1-GS08 in my circuit?

    • The VLZ5V1-GS08 can be connected using standard PCB layout guidelines provided in the datasheet. Typically, it requires power and ground connections along with input and output signal connections.

  4. What are the typical applications of the VLZ5V1-GS08?

    • The VLZ5V1-GS08 is commonly used in applications such as data communication interfaces, sensor interfacing, and general level shifting requirements in electronic systems.

  5. Can the VLZ5V1-GS08 handle bidirectional level shifting?

    • Yes, the VLZ5V1-GS08 supports bidirectional level shifting, allowing for seamless translation of signals in both directions.

  6. What is the maximum data rate supported by the VLZ5V1-GS08?

    • The VLZ5V1-GS08 can support data rates up to several megahertz, making it suitable for high-speed digital communication applications.

  7. Does the VLZ5V1-GS08 require external components for operation?

    • In most cases, the VLZ5V1-GS08 does not require external components for basic level shifting operations, simplifying its integration into circuits.

  8. Is the VLZ5V1-GS08 tolerant to overvoltage conditions?

    • The VLZ5V1-GS08 has built-in protection features to withstand overvoltage conditions, enhancing its robustness in real-world applications.

  9. Can the VLZ5V1-GS08 operate in harsh environmental conditions?

    • The VLZ5V1-GS08 is designed to operate within specified temperature and humidity ranges, making it suitable for a wide range of environmental conditions.

  10. Where can I find detailed specifications and application notes for the VLZ5V1-GS08?

    • Detailed specifications, application notes, and design guidelines for the VLZ5V1-GS08 can be found in the product datasheet and technical documentation provided by the manufacturer.