Toshiba Semiconductor and Storage
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
TK13A45D(STA4,Q,M)
Ver detalhes DataSheets

TK13A45D(STA4,Q,M)

Product Overview

TK13A45D belongs to the category of power MOSFETs and is commonly used in electronic circuits for switching and amplification purposes. It possesses characteristics such as high voltage tolerance, low on-state resistance, and fast switching speed. The package typically consists of a TO-220 or TO-263 casing, and the essence of this product lies in its ability to efficiently control the flow of current in electronic devices. Each package contains a single TK13A45D unit.

Specifications

  • Maximum Voltage: 450V
  • Maximum Current: 13A
  • On-State Resistance: 0.45Ω
  • Package: TO-220 or TO-263

Detailed Pin Configuration

The TK13A45D MOSFET has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage tolerance
  • Low on-state resistance
  • Fast switching speed

Advantages and Disadvantages

Advantages: - Efficient current control - Fast switching speed - Low power dissipation

Disadvantages: - Sensitivity to static electricity - Limited maximum current capacity

Working Principles

TK13A45D operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a positive voltage is applied to the gate, it allows current to flow from the drain to the source, and vice versa when a negative voltage is applied.

Detailed Application Field Plans

TK13A45D is widely used in various electronic applications, including: - Switching power supplies - Motor control circuits - Audio amplifiers - LED lighting systems

Detailed and Complete Alternative Models

  1. TK10A40D

    • Maximum Voltage: 400V
    • Maximum Current: 10A
    • On-State Resistance: 0.4Ω
    • Package: TO-220 or TO-263

  2. TK15A50D

    • Maximum Voltage: 500V
    • Maximum Current: 15A
    • On-State Resistance: 0.5Ω
    • Package: TO-220 or TO-263

  3. TK20A60D

    • Maximum Voltage: 600V
    • Maximum Current: 20A
    • On-State Resistance: 0.6Ω
    • Package: TO-220 or TO-263

In conclusion, TK13A45D is a versatile power MOSFET with high voltage tolerance and fast switching speed, making it suitable for a wide range of electronic applications.

Word count: 366

Liste 10 perguntas e respostas comuns relacionadas à aplicação de TK13A45D(STA4,Q,M) em soluções técnicas

  1. What is TK13A45D(STA4,Q,M)?

    • TK13A45D(STA4,Q,M) is a specific model of a semiconductor device, commonly used in power electronics applications.

  2. What are the key features of TK13A45D(STA4,Q,M)?

    • The key features of TK13A45D(STA4,Q,M) include high voltage capability, low on-state resistance, and fast switching speed.

  3. What are the typical applications of TK13A45D(STA4,Q,M)?

    • TK13A45D(STA4,Q,M) is commonly used in applications such as motor control, power supplies, and lighting systems.

  4. What is the maximum voltage and current rating for TK13A45D(STA4,Q,M)?

    • The maximum voltage and current ratings for TK13A45D(STA4,Q,M) are typically specified in the datasheet provided by the manufacturer.

  5. How does TK13A45D(STA4,Q,M) compare to similar semiconductor devices?

    • TK13A45D(STA4,Q,M) may offer advantages such as lower on-state resistance or higher voltage capability compared to similar devices.

  6. What are the recommended operating conditions for TK13A45D(STA4,Q,M)?

    • The recommended operating conditions, including temperature and voltage ranges, can be found in the device's datasheet.

  7. Are there any specific thermal management considerations for TK13A45D(STA4,Q,M)?

    • Proper heat sinking and thermal management are important for ensuring the reliable operation of TK13A45D(STA4,Q,M) in high-power applications.

  8. Can TK13A45D(STA4,Q,M) be used in parallel configurations for higher current handling?

    • The feasibility of using TK13A45D(STA4,Q,M) in parallel configurations should be evaluated based on the application requirements and the device's characteristics.

  9. What are the protection features available in TK13A45D(STA4,Q,M) to safeguard against overcurrent or overvoltage conditions?

    • The device may include built-in protection features or require external circuitry to protect against overcurrent or overvoltage conditions.

  10. Where can I find detailed technical documentation and application notes for TK13A45D(STA4,Q,M)?

    • Detailed technical documentation and application notes for TK13A45D(STA4,Q,M) can typically be obtained from the manufacturer's website or through authorized distributors.