XC61CC2802MR-G belongs to the category of voltage detectors.
It is used for detecting and monitoring voltage levels in electronic circuits.
XC61CC2802MR-G is available in a small surface mount package.
The essence of XC61CC2802MR-G lies in its ability to accurately detect voltage levels and provide reliable monitoring in various electronic applications.
XC61CC2802MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
XC61CC2802MR-G has three pins:
XC61CC2802MR-G operates based on a voltage divider circuit. It compares the input voltage with a reference voltage and provides an output signal indicating whether the voltage is above or below the detection threshold.
XC61CC2802MR-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Power management systems - Consumer electronics - Industrial control systems - Automotive electronics
Some alternative models that offer similar functionality to XC61CC2802MR-G are: - XC61CC2802MR-G-ND - XC61CC2802MR-G-C - XC61CC2802MR-G-F
These models may have slight variations in specifications or package options, but they serve the same purpose of voltage detection and monitoring.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of XC61CC2802MR-G in technical solutions:
Q: What is XC61CC2802MR-G? A: XC61CC2802MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC61CC2802MR-G? A: The operating voltage range of XC61CC2802MR-G is from 0.8V to 6.0V.
Q: How does XC61CC2802MR-G detect voltage levels? A: XC61CC2802MR-G detects voltage levels by comparing the input voltage with a fixed reference voltage internally set within the IC.
Q: Can XC61CC2802MR-G be used in battery-powered applications? A: Yes, XC61CC2802MR-G can be used in battery-powered applications as it operates within a wide voltage range and has low power consumption.
Q: What is the output configuration of XC61CC2802MR-G? A: XC61CC2802MR-G has an open-drain output configuration, which requires an external pull-up resistor to provide a logic-level output.
Q: What is the typical quiescent current of XC61CC2802MR-G? A: The typical quiescent current of XC61CC2802MR-G is very low, typically around 1.0µA.
Q: Can XC61CC2802MR-G be used for overvoltage protection? A: No, XC61CC2802MR-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection.
Q: What is the accuracy of XC61CC2802MR-G in detecting voltage levels? A: The accuracy of XC61CC2802MR-G is typically ±1.5% of the detection voltage.
Q: Can XC61CC2802MR-G be used in automotive applications? A: Yes, XC61CC2802MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Are there any specific precautions to consider when using XC61CC2802MR-G? A: It is recommended to avoid applying voltages higher than the maximum operating voltage (6.0V) or reverse voltages to XC61CC2802MR-G to prevent damage to the IC.
Please note that these answers are general and may vary depending on the specific application and requirements.