A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
XC6124D526MR-G

XC6124D526MR-G

Product Overview

Category

XC6124D526MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6124D526MR-G provides a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.

Package

XC6124D526MR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6124D526MR-G lies in its ability to maintain a constant voltage output despite variations in the input voltage.

Packaging/Quantity

XC6124D526MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 2.6V
  • Maximum output current: 100mA
  • Dropout voltage: 200mV (at 50mA)
  • Quiescent current: 30µA
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6124D526MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Maintains a stable output voltage within the specified range.
  • Low dropout voltage: Operates efficiently even with a small difference between input and output voltages.
  • Low quiescent current: Consumes minimal current when no load is connected.
  • Thermal shutdown protection: Prevents damage due to excessive heat by automatically shutting down.

Advantages and Disadvantages

Advantages

  • Stable output voltage regardless of input voltage fluctuations.
  • Efficient operation with low dropout voltage.
  • Minimal power consumption in standby mode.
  • Protection against overheating.

Disadvantages

  • Limited maximum output current (100mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC6124D526MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a constant output voltage.

Detailed Application Field Plans

XC6124D526MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D526MR-G are: - LM1117-2.6 - MCP1702-2.6 - LP2985-2.6 - TPS73626

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6124D526MR-G is a voltage regulator that provides stable output voltage, low dropout voltage, and low quiescent current. It is commonly used in various electronic devices and offers thermal shutdown protection. While it has limitations in terms of maximum output current and input voltage range, there are alternative models available for consideration.

Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6124D526MR-G em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of XC6124D526MR-G in technical solutions:

  1. Question: What is XC6124D526MR-G?
    Answer: XC6124D526MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124D526MR-G?
    Answer: The operating voltage range of XC6124D526MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124D526MR-G detect the power supply voltage?
    Answer: XC6124D526MR-G uses an internal voltage reference and a comparator to monitor the power supply voltage.

  4. Question: What is the purpose of using XC6124D526MR-G in a technical solution?
    Answer: XC6124D526MR-G can be used to monitor the power supply voltage and trigger actions or alarms when the voltage falls below a certain level, ensuring the stability and reliability of the system.

  5. Question: Can XC6124D526MR-G be used in battery-powered applications?
    Answer: Yes, XC6124D526MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the output configuration of XC6124D526MR-G?
    Answer: XC6124D526MR-G has an open-drain output configuration, which allows for flexibility in connecting external components.

  7. Question: Can XC6124D526MR-G be used in automotive applications?
    Answer: Yes, XC6124D526MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: What is the accuracy of the voltage detection threshold in XC6124D526MR-G?
    Answer: The accuracy of the voltage detection threshold in XC6124D526MR-G is typically ±1.5%.

  9. Question: Can XC6124D526MR-G be used in industrial control systems?
    Answer: Yes, XC6124D526MR-G can be used in industrial control systems to monitor and protect power supply voltages.

  10. Question: Is XC6124D526MR-G available in a small package size?
    Answer: Yes, XC6124D526MR-G is available in a compact SOT-25 package, making it suitable for space-constrained applications.

Please note that the answers provided are general and may vary depending on the specific datasheet and application requirements.