Veja as especificações para detalhes do produto.
XC6123D741ER-G
Product Overview
Category
XC6123D741ER-G belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Voltage regulation
- Stabilization of output voltage
- Compact size
- High efficiency
Package
XC6123D741ER-G is available in a small package, suitable for surface mount technology (SMT).
Essence
The essence of XC6123D741ER-G lies in its ability to provide stable voltage output for various electronic devices.
Packaging/Quantity
XC6123D741ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Output Current: 150mA
- Dropout Voltage: 200mV @ 100mA
- Quiescent Current: 40µA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D741ER-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Low dropout voltage
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages
- Small form factor
- High efficiency
- Wide input voltage range
- Stable output voltage
- Built-in protection features
Disadvantages
- Limited output current capacity
- Requires external components for proper operation
Working Principles
XC6123D741ER-G operates by regulating the input voltage to provide a stable output voltage. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring a consistent output even with varying input conditions.
Detailed Application Field Plans
XC6123D741ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D741ER-G are: - LM1117-ADJ - MCP1700-3302E/TO - TS2940CP5
These models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, XC6123D741ER-G is a voltage regulator that provides stable voltage output for electronic circuits. Its compact size, high efficiency, and built-in protection features make it suitable for various applications. However, it has limitations in terms of output current capacity and requires external components for proper operation.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6123D741ER-G em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of XC6123D741ER-G in technical solutions:
Q: What is XC6123D741ER-G? A: XC6123D741ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123D741ER-G? A: The operating voltage range of XC6123D741ER-G is typically between 0.65V and 6.0V.
Q: How does XC6123D741ER-G work? A: XC6123D741ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the status of the power supply.
Q: What is the output type of XC6123D741ER-G? A: XC6123D741ER-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.
Q: What is the typical quiescent current consumption of XC6123D741ER-G? A: The typical quiescent current consumption of XC6123D741ER-G is very low, usually around 1.0µA.
Q: Can XC6123D741ER-G be used for undervoltage and overvoltage detection? A: Yes, XC6123D741ER-G can be used for both undervoltage and overvoltage detection. It has separate thresholds for each condition that can be set using external resistors.
Q: What is the typical accuracy of XC6123D741ER-G? A: The typical accuracy of XC6123D741ER-G is ±1.5% at room temperature. However, it may vary with temperature and other external factors.
Q: Can XC6123D741ER-G be used in battery-powered applications? A: Yes, XC6123D741ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive devices.
Q: Does XC6123D741ER-G have any built-in hysteresis? A: Yes, XC6123D741ER-G has a built-in hysteresis of typically 50mV, which helps to prevent output oscillation near the threshold voltage.
Q: What is the package type of XC6123D741ER-G? A: XC6123D741ER-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.