Veja as especificações para detalhes do produto.
XC6123D434MR-G
Product Overview
Category
XC6123D434MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123D434MR-G comes in a small surface-mount package.
Essence
The essence of XC6123D434MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels and available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.34V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 35µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D434MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123D434MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small form factor allows for space-saving designs.
- High efficiency results in minimal power loss.
- Wide input voltage range makes it compatible with various power sources.
- Overcurrent and thermal protection enhance circuit reliability.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Lack of adjustable output voltage limits flexibility in certain scenarios.
Working Principles
XC6123D434MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.
Detailed Application Field Plans
XC6123D434MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - IoT devices - Battery-powered systems - Wearable devices - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D434MR-G are: - XC6206P332MR: Output voltage of 3.3V, higher output current capability. - XC6220B331MR: Output voltage of 3.3V, lower quiescent current. - XC6219B331MR: Output voltage of 3.3V, adjustable output voltage.
These alternative models provide different specifications and features, allowing designers to choose the most suitable option for their specific requirements.
Word count: 408 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6123D434MR-G em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of XC6123D434MR-G in technical solutions:
Q: What is XC6123D434MR-G? A: XC6123D434MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6123D434MR-G? A: The operating voltage range of XC6123D434MR-G is typically between 0.8V and 6.0V.
Q: How does XC6123D434MR-G help in technical solutions? A: XC6123D434MR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.
Q: Can XC6123D434MR-G be used in battery-powered applications? A: Yes, XC6123D434MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output configuration of XC6123D434MR-G? A: XC6123D434MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.
Q: What is the typical accuracy of the voltage detection threshold in XC6123D434MR-G? A: The typical accuracy of the voltage detection threshold in XC6123D434MR-G is ±1.5%.
Q: Can XC6123D434MR-G be used for overvoltage protection? A: No, XC6123D434MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.
Q: What is the response time of XC6123D434MR-G? A: The response time of XC6123D434MR-G is typically 200µs, which means it can quickly detect voltage drops or fluctuations.
Q: Can XC6123D434MR-G be used in automotive applications? A: Yes, XC6123D434MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Is XC6123D434MR-G available in different package options? A: Yes, XC6123D434MR-G is available in a SOT-25 package, which is a small surface-mount package commonly used in electronic devices.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.