Torex Semiconductor Ltd
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
XC6123C250MG-G
Ver detalhes DataSheets

XC6123C250MG-G

Product Overview

Category

XC6123C250MG-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.5V
  • Maximum Output Current: 250mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Package

XC6123C250MG-G is available in a small SOT-25 package.

Essence

The essence of XC6123C250MG-G is its ability to provide stable and regulated voltage output in various electronic applications.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.5V
  • Maximum Output Current: 250mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Load Regulation: ±1%
  • Line Regulation: ±0.5%
  • Ripple Rejection Ratio: 70dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123C250MG-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • High ripple rejection ratio
  • Short-circuit protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • Stable and regulated output voltage
  • Low power consumption
  • Small package size

Disadvantages

  • Limited maximum output current (250mA)
  • Dropout voltage may affect efficiency in low input voltage scenarios

Working Principles

XC6123C250MG-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6123C250MG-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to XC6123C250MG-G are: - XC6123C330MG-G: Output voltage of 3.3V, maximum output current of 250mA - XC6123C500MG-G: Output voltage of 5.0V, maximum output current of 250mA - XC6123C180MG-G: Output voltage of 1.8V, maximum output current of 250mA

These alternative models provide different output voltages while maintaining similar characteristics and functionality.

Word count: 314 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6123C250MG-G em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of XC6123C250MG-G in technical solutions:

  1. Question: What is XC6123C250MG-G?
    - Answer: XC6123C250MG-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123C250MG-G?
    - Answer: The operating voltage range of XC6123C250MG-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123C250MG-G help in technical solutions?
    - Answer: XC6123C250MG-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6123C250MG-G?
    - Answer: XC6123C250MG-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the typical reset threshold voltage of XC6123C250MG-G?
    - Answer: The typical reset threshold voltage of XC6123C250MG-G is 2.5V.

  6. Question: Can XC6123C250MG-G be used in battery-powered applications?
    - Answer: Yes, XC6123C250MG-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6123C250MG-G have any built-in delay for the reset signal?
    - Answer: Yes, XC6123C250MG-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Is XC6123C250MG-G available in different package options?
    - Answer: Yes, XC6123C250MG-G is available in various package options, including SOT-25 and USP-4B.

  9. Question: Can XC6123C250MG-G be used in automotive applications?
    - Answer: Yes, XC6123C250MG-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  10. Question: Are there any application notes or reference designs available for XC6123C250MG-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6123C250MG-G, which can help in understanding its usage and integration into different technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.