Torex Semiconductor Ltd
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
XC6122F726MR-G
Ver detalhes DataSheets

XC6122F726MR-G

Product Overview

Category

XC6122F726MR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • Low power consumption

Package

XC6122F726MR-G is available in a small form factor package, typically a surface mount technology (SMT) package.

Essence

The essence of XC6122F726MR-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

This product is usually packaged in reels or tubes, with a typical quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 1.8V - 6.0V
  • Output Voltage Range: 0.8V - 5.0V
  • Maximum Output Current: 200mA
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122F726MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6122F726MR-G ensures a stable output voltage within the specified range.
  • Power management: This IC efficiently manages power consumption, reducing energy waste.
  • Enable pin: The optional enable pin allows for control over the device's operation.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained designs.
  • Low quiescent current minimizes power consumption.
  • Wide input and output voltage ranges provide flexibility in various applications.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Lack of built-in protection features may require additional circuitry for certain applications.

Working Principles

XC6122F726MR-G operates based on a voltage regulation principle. It takes an input voltage and regulates it to provide a stable output voltage within the specified range. The enable pin allows for control over the device's operation, enabling or disabling the voltage regulation function.

Detailed Application Field Plans

XC6122F726MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122F726MR-G are: - XC6122F726ML-G - XC6122F726MR - XC6122F726ML

These models offer similar voltage regulation and power management capabilities, with slight variations in package type or other specifications.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6122F726MR-G em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of XC6122F726MR-G in technical solutions:

  1. Question: What is XC6122F726MR-G?
    - Answer: XC6122F726MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122F726MR-G?
    - Answer: The operating voltage range of XC6122F726MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122F726MR-G work?
    - Answer: XC6122F726MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal indicating the voltage status.

  4. Question: What is the output type of XC6122F726MR-G?
    - Answer: XC6122F726MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the quiescent current consumption of XC6122F726MR-G?
    - Answer: The quiescent current consumption of XC6122F726MR-G is typically around 1.0µA, making it suitable for low-power applications.

  6. Question: Can XC6122F726MR-G be used for overvoltage protection?
    - Answer: No, XC6122F726MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122F726MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122F726MR-G is typically ±1.5%.

  8. Question: Can XC6122F726MR-G be used in automotive applications?
    - Answer: Yes, XC6122F726MR-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage monitoring.

  9. Question: Does XC6122F726MR-G have built-in hysteresis?
    - Answer: Yes, XC6122F726MR-G has a built-in hysteresis of typically 10% to prevent output oscillation near the detection threshold.

  10. Question: What is the package type of XC6122F726MR-G?
    - Answer: XC6122F726MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.