Torex Semiconductor Ltd
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
XC6122E734MR-G
Ver detalhes DataSheets

XC6122E734MR-G

Product Overview

Category

XC6122E734MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122E734MR-G comes in a small SOT-25 package.

Essence

The essence of XC6122E734MR-G is to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 35µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E734MR-G has three pins:

  1. VIN: Input voltage pin
  2. VOUT: Output voltage pin
  3. GND: Ground pin

Functional Features

  • Voltage regulation: XC6122E734MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: The regulator shuts down automatically if the temperature exceeds a certain threshold, preventing damage to the device.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal protection enhance the reliability and longevity of the circuit.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6122E734MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6122E734MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E734MR-G are: - LM1117-3.3: A popular linear voltage regulator with similar specifications. - AP2112-3.3: Another low dropout voltage regulator suitable for various applications. - MCP1700-3302E: A compact and efficient voltage regulator with a wide input voltage range.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 386 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6122E734MR-G em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of XC6122E734MR-G in technical solutions:

  1. Question: What is XC6122E734MR-G?
    Answer: XC6122E734MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6122E734MR-G?
    Answer: The operating voltage range of XC6122E734MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122E734MR-G work?
    Answer: XC6122E734MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below or rises above a certain threshold, it triggers an output signal.

  4. Question: What is the output type of XC6122E734MR-G?
    Answer: XC6122E734MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the quiescent current consumption of XC6122E734MR-G?
    Answer: The quiescent current consumption of XC6122E734MR-G is typically around 1.0µA, making it suitable for low-power applications.

  6. Question: Can XC6122E734MR-G be used for overvoltage protection?
    Answer: No, XC6122E734MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122E734MR-G?
    Answer: The accuracy of the voltage detection threshold in XC6122E734MR-G is typically ±1.5%.

  8. Question: Can XC6122E734MR-G be used in automotive applications?
    Answer: Yes, XC6122E734MR-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: What is the temperature range of XC6122E734MR-G?
    Answer: The temperature range of XC6122E734MR-G is typically between -40°C and +85°C.

  10. Question: Can XC6122E734MR-G be used in battery-powered devices?
    Answer: Yes, XC6122E734MR-G's low quiescent current consumption makes it suitable for battery-powered devices where power efficiency is crucial.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.