Veja as especificações para detalhes do produto.
XC6121C335MR-G
Product Overview
Category
XC6121C335MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- High efficiency
Package
XC6121C335MR-G comes in a small package, suitable for surface mount technology (SMT) applications.
Essence
The essence of XC6121C335MR-G lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
This product is typically packaged in reels or tape and reel packaging. The quantity per reel varies depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121C335MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: XC6121C335MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
- Low quiescent current: The low quiescent current ensures minimal power consumption when the device is idle.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact electronic designs.
- High efficiency results in minimal power loss during voltage regulation.
- Overcurrent protection ensures the safety of connected devices.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
XC6121C335MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop continuously monitors and regulates the output voltage, compensating for any variations in the input voltage or load conditions.
Detailed Application Field Plans
XC6121C335MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial automation systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6121C335MR-G include: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These alternatives can be considered based on specific requirements and availability.
Word count: 329 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6121C335MR-G em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of XC6121C335MR-G in technical solutions:
Q1: What is XC6121C335MR-G? A1: XC6121C335MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q2: What is the operating voltage range of XC6121C335MR-G? A2: The operating voltage range of XC6121C335MR-G is from 0.8V to 6.0V.
Q3: What is the output type of XC6121C335MR-G? A3: XC6121C335MR-G has an open-drain output type.
Q4: What is the typical quiescent current of XC6121C335MR-G? A4: The typical quiescent current of XC6121C335MR-G is 1.0µA.
Q5: What is the accuracy of the detection voltage of XC6121C335MR-G? A5: The accuracy of the detection voltage of XC6121C335MR-G is ±1.0%.
Q6: Can XC6121C335MR-G be used for overvoltage detection? A6: No, XC6121C335MR-G is specifically designed for undervoltage detection only.
Q7: What is the maximum reset time delay of XC6121C335MR-G? A7: The maximum reset time delay of XC6121C335MR-G is typically 200ms.
Q8: Is XC6121C335MR-G suitable for automotive applications? A8: Yes, XC6121C335MR-G is AEC-Q100 qualified and can be used in automotive applications.
Q9: Can XC6121C335MR-G operate in a wide temperature range? A9: Yes, XC6121C335MR-G has an operating temperature range of -40°C to +105°C.
Q10: What is the package type of XC6121C335MR-G? A10: XC6121C335MR-G is available in a SOT-25 package.
Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.