Torex Semiconductor Ltd
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
XC6119C40ANR-G
Ver detalhes DataSheets

XC6119C40ANR-G

Product Overview

Category

XC6119C40ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact package size
  • High efficiency
  • Low power consumption

Package

XC6119C40ANR-G is available in a small form factor package, which ensures easy integration into various electronic devices.

Essence

The essence of XC6119C40ANR-G lies in its ability to regulate voltage and manage power efficiently, making it an essential component in many electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.0V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119C40ANR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6119C40ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The product incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption during standby mode.

Advantages and Disadvantages

Advantages

  • High efficiency in voltage regulation
  • Compact package size for easy integration
  • Overcurrent protection ensures device safety
  • Low power consumption during standby mode

Disadvantages

  • Limited output current capacity (100mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

XC6119C40ANR-G operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The device continuously monitors the input voltage, output voltage, and load conditions to ensure efficient power management.

Detailed Application Field Plans

XC6119C40ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6119C40ANR-G are: - XC6119C42ANR-G: Similar specifications with a different output voltage (4.2V) - XC6119C38ANR-G: Similar specifications with a different output voltage (3.8V) - XC6119C36ANR-G: Similar specifications with a different output voltage (3.6V)

These alternative models provide flexibility in choosing the desired output voltage while maintaining similar characteristics and features.

Word count: 345 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6119C40ANR-G em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of XC6119C40ANR-G in technical solutions:

  1. Q: What is XC6119C40ANR-G? A: XC6119C40ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.

  2. Q: What is the operating voltage range of XC6119C40ANR-G? A: The operating voltage range of XC6119C40ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119C40ANR-G help in technical solutions? A: XC6119C40ANR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a certain level, ensuring proper system initialization.

  4. Q: What is the typical reset voltage threshold of XC6119C40ANR-G? A: The typical reset voltage threshold of XC6119C40ANR-G is 4.0V.

  5. Q: Can XC6119C40ANR-G be used in battery-powered applications? A: Yes, XC6119C40ANR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  6. Q: Does XC6119C40ANR-G have any built-in delay time for the reset signal? A: Yes, XC6119C40ANR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Can XC6119C40ANR-G be used in automotive applications? A: Yes, XC6119C40ANR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: What is the package type of XC6119C40ANR-G? A: XC6119C40ANR-G is available in a SOT-23-5 package, which is compact and widely used in various electronic devices.

  9. Q: Is XC6119C40ANR-G compatible with both CMOS and TTL logic levels? A: Yes, XC6119C40ANR-G is compatible with both CMOS and TTL logic levels, making it versatile for different system designs.

  10. Q: Where can I find more information about XC6119C40ANR-G? A: You can refer to the datasheet or contact the manufacturer for more detailed information about XC6119C40ANR-G, including electrical characteristics, application notes, and recommended usage guidelines.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6119C40ANR-G.