Veja as especificações para detalhes do produto.
XC6119C36ANR-G
Product Overview
Category
XC6119C36ANR-G belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for voltage regulation and power management.
Characteristics
- Voltage regulation capabilities
- Power management features
- Compact package size
- High efficiency
- Low power consumption
Package
XC6119C36ANR-G is available in a small form factor package, which ensures easy integration into various electronic devices.
Essence
The essence of XC6119C36ANR-G lies in its ability to regulate voltage and efficiently manage power consumption in electronic devices.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a specific quantity per package depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.6V
- Output Current: Up to 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6119C36ANR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6119C36ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The product incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown: In case of excessive temperature, the device automatically shuts down to prevent damage.
- Low quiescent current: The low quiescent current ensures minimal power consumption during standby mode.
Advantages and Disadvantages
Advantages
- High efficiency in voltage regulation
- Compact size for easy integration
- Overcurrent protection for device safety
- Low power consumption during standby mode
Disadvantages
- Limited output current capacity (up to 100mA)
- Dropout voltage may affect performance in low input voltage scenarios
Working Principles
XC6119C36ANR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It continuously monitors the input voltage and adjusts its internal components to maintain a stable output voltage, even under varying load conditions.
Detailed Application Field Plans
XC6119C36ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6119C36ANR-G include: - XC6119C33ANR-G: Output voltage of 3.3V - XC6119C50ANR-G: Output voltage of 5.0V - XC6119C18ANR-G: Output voltage of 1.8V
These alternative models cater to different voltage requirements while maintaining similar characteristics and features.
Word count: 398 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de XC6119C36ANR-G em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of XC6119C36ANR-G in technical solutions:
Q: What is XC6119C36ANR-G? A: XC6119C36ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6119C36ANR-G? A: The operating voltage range of XC6119C36ANR-G is typically between 0.8V and 6.0V.
Q: How does XC6119C36ANR-G help in technical solutions? A: XC6119C36ANR-G helps ensure stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent erratic behavior or data corruption during power fluctuations.
Q: Can XC6119C36ANR-G be used in battery-powered applications? A: Yes, XC6119C36ANR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the typical reset threshold voltage of XC6119C36ANR-G? A: The typical reset threshold voltage of XC6119C36ANR-G is 3.6V.
Q: Does XC6119C36ANR-G have an adjustable reset threshold voltage? A: No, XC6119C36ANR-G has a fixed reset threshold voltage and does not offer adjustment options.
Q: Can XC6119C36ANR-G generate an interrupt signal instead of a reset signal? A: No, XC6119C36ANR-G is designed to generate a reset signal and does not have an interrupt output.
Q: What is the typical response time of XC6119C36ANR-G? A: The typical response time of XC6119C36ANR-G is 200µs.
Q: Is XC6119C36ANR-G suitable for automotive applications? A: Yes, XC6119C36ANR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6119C36ANR-G be used in industrial temperature environments? A: Yes, XC6119C36ANR-G has an operating temperature range of -40°C to +105°C, making it suitable for industrial temperature environments.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6119C36ANR-G.