XC6118N12AMR-G belongs to the category of voltage regulators.
It is commonly used for regulating voltage in electronic circuits.
The specifications of XC6118N12AMR-G are as follows:
XC6118N12AMR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin Configuration: 1. VIN: Input Voltage 2. GND: Ground 3. EN: Enable Pin 4. NC: No Connection 5. VOUT: Output Voltage
The XC6118N12AMR-G operates by comparing the output voltage with a reference voltage. It adjusts the pass transistor's resistance to maintain a stable output voltage, compensating for any changes in the input voltage or load conditions. The enable pin allows for easy control of the regulator's operation, providing flexibility in power management.
XC6118N12AMR-G can be used in various electronic devices and circuits that require stable and regulated voltage. Some potential application fields include:
Some alternative models that offer similar functionality to XC6118N12AMR-G are:
These alternative models can be considered based on specific requirements and application needs.
Word count: 511 words
Sure! Here are 10 common questions and answers related to the application of XC6118N12AMR-G in technical solutions:
Q: What is XC6118N12AMR-G? A: XC6118N12AMR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6118N12AMR-G? A: The operating voltage range of XC6118N12AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N12AMR-G work? A: XC6118N12AMR-G continuously monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the typical reset voltage threshold of XC6118N12AMR-G? A: The typical reset voltage threshold of XC6118N12AMR-G is 1.2V.
Q: Can XC6118N12AMR-G be used in battery-powered applications? A: Yes, XC6118N12AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Is XC6118N12AMR-G suitable for automotive applications? A: Yes, XC6118N12AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6118N12AMR-G have built-in hysteresis? A: Yes, XC6118N12AMR-G has built-in hysteresis of typically 50mV, which helps to prevent oscillation near the threshold voltage.
Q: Can XC6118N12AMR-G be used in a wide temperature range? A: Yes, XC6118N12AMR-G has an operating temperature range of -40°C to +105°C, making it suitable for various environments.
Q: What is the output type of XC6118N12AMR-G? A: XC6118N12AMR-G has an open-drain output, which allows for flexibility in connecting to other devices.
Q: Is XC6118N12AMR-G available in different package options? A: Yes, XC6118N12AMR-G is available in various package options, such as SOT-23-5 and USP-4C, providing flexibility for different PCB layouts.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N12AMR-G.