XC6118C31AMR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize the voltage in electronic circuits.
The specifications of XC6118C31AMR-G are as follows:
XC6118C31AMR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin Configuration: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. NC: No connection 5. VOUT: Output voltage pin
Advantages: - Low dropout voltage ensures efficient regulation. - Low quiescent current minimizes power consumption. - Thermal shutdown protection prevents damage from overheating.
Disadvantages: - Limited output current of 150mA may not be suitable for high-power applications.
The XC6118C31AMR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
XC6118C31AMR-G can be used in various electronic devices and circuits, including but not limited to: 1. Battery-powered devices: It can regulate the voltage in portable electronic devices such as smartphones, tablets, and digital cameras. 2. IoT devices: The low quiescent current makes it suitable for IoT applications where power efficiency is crucial. 3. Automotive electronics: It can be used in automotive systems to regulate voltage for sensors, actuators, and other components.
Some alternative models to XC6118C31AMR-G are: 1. XC6118C31AMR-G-ND 2. XC6118C31AMR-G-CT 3. XC6118C31AMR-G-TR
These models have similar specifications and functionality, providing alternatives for different packaging options or quantities.
Word count: 411 words
Sure! Here are 10 common questions and answers related to the application of XC6118C31AMR-G in technical solutions:
Q: What is XC6118C31AMR-G? A: XC6118C31AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C31AMR-G? A: The operating voltage range of XC6118C31AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C31AMR-G help in technical solutions? A: XC6118C31AMR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset threshold voltage of XC6118C31AMR-G? A: The typical reset threshold voltage of XC6118C31AMR-G is 3.1V.
Q: Can XC6118C31AMR-G be used in battery-powered applications? A: Yes, XC6118C31AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6118C31AMR-G have any built-in delay for the reset signal? A: Yes, XC6118C31AMR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118C31AMR-G suitable for automotive applications? A: Yes, XC6118C31AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6118C31AMR-G be used in industrial control systems? A: Yes, XC6118C31AMR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.
Q: Does XC6118C31AMR-G have any additional features? A: Yes, XC6118C31AMR-G has an open-drain output and a manual reset input pin for added flexibility in system design.
Q: Is XC6118C31AMR-G available in different package options? A: Yes, XC6118C31AMR-G is available in various package options, including SOT-23-5 and USP-4B05.