XC6118C28AMR-G belongs to the category of voltage regulators.
It is commonly used for voltage regulation in electronic circuits.
The specifications of XC6118C28AMR-G are as follows:
XC6118C28AMR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin Configuration: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. NC: No connection pin 5. VOUT: Output voltage pin
The functional features of XC6118C28AMR-G include:
Advantages: - Low dropout voltage allows for efficient power conversion. - Low quiescent current minimizes power consumption. - Thermal shutdown protection ensures device safety. - Short-circuit protection prevents damage to the regulator.
Disadvantages: - Limited output current capacity (maximum 150mA). - Narrow input voltage range (2.5V to 6.0V).
XC6118C28AMR-G is a low dropout voltage regulator that maintains a stable output voltage despite variations in the input voltage. It achieves this by using a pass transistor and feedback mechanism. The regulator compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain the desired output voltage.
XC6118C28AMR-G finds applications in various electronic devices, including but not limited to:
Some alternative models that can be considered as alternatives to XC6118C28AMR-G are:
These alternative models provide options for designers based on specific requirements and availability.
Word count: 474 words
Sure! Here are 10 common questions and answers related to the application of XC6118C28AMR-G in technical solutions:
Q: What is XC6118C28AMR-G? A: XC6118C28AMR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6118C28AMR-G? A: The operating voltage range of XC6118C28AMR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C28AMR-G help in technical solutions? A: XC6118C28AMR-G helps in technical solutions by ensuring proper system initialization and preventing data corruption or malfunctioning due to unstable power supply voltages.
Q: What is the output type of XC6118C28AMR-G? A: XC6118C28AMR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.
Q: What is the typical reset threshold voltage of XC6118C28AMR-G? A: The typical reset threshold voltage of XC6118C28AMR-G is 2.8V.
Q: Can XC6118C28AMR-G be used in battery-powered applications? A: Yes, XC6118C28AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Is XC6118C28AMR-G suitable for automotive applications? A: Yes, XC6118C28AMR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6118C28AMR-G be used in both digital and analog circuits? A: Yes, XC6118C28AMR-G can be used in both digital and analog circuits as it does not introduce any noise or interference.
Q: Does XC6118C28AMR-G have built-in hysteresis? A: Yes, XC6118C28AMR-G has a built-in hysteresis of typically 0.1V, which helps to prevent oscillation near the threshold voltage.
Q: What is the package type of XC6118C28AMR-G? A: XC6118C28AMR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.