The TPS3851H50EDRBR belongs to the category of voltage supervisors.
This product is primarily used for monitoring and supervising voltage levels in electronic systems.
The TPS3851H50EDRBR is available in a small 6-pin SON (Small Outline No-Lead) package, measuring 2mm x 2mm.
The essence of the TPS3851H50EDRBR lies in its ability to monitor and supervise voltage levels with high accuracy and low power consumption.
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The TPS3851H50EDRBR has the following pin configuration:
The TPS3851H50EDRBR operates by comparing the monitored voltage level with a preset threshold. When the voltage falls below the threshold, the reset output is asserted, indicating a power-on reset condition. The power-on reset delay can be adjusted using an external capacitor connected to the MR pin. The open-drain output allows the device to communicate the reset status to other components in the system.
The TPS3851H50EDRBR finds application in various fields, including but not limited to: - Industrial automation systems - Automotive electronics - Consumer electronics - Medical devices - Power management systems
These alternative models offer similar functionality with slight variations in specifications to cater to different application requirements.
Word count: 533 words
Sure! Here are 10 common questions and answers related to the application of TPS3851H50EDRBR in technical solutions:
Q1: What is the TPS3851H50EDRBR? A1: The TPS3851H50EDRBR is a voltage supervisor and reset IC designed for monitoring power supply voltages in various applications.
Q2: What is the operating voltage range of TPS3851H50EDRBR? A2: The TPS3851H50EDRBR operates within a voltage range of 1.8V to 5.5V.
Q3: What is the purpose of using TPS3851H50EDRBR in technical solutions? A3: The TPS3851H50EDRBR is used to monitor power supply voltages and generate a reset signal when the voltage falls below a certain threshold, ensuring proper system operation.
Q4: Can TPS3851H50EDRBR be used in battery-powered applications? A4: Yes, TPS3851H50EDRBR can be used in battery-powered applications as it operates within a wide voltage range and has low quiescent current consumption.
Q5: How many voltage thresholds can TPS3851H50EDRBR monitor? A5: TPS3851H50EDRBR can monitor one voltage threshold, which can be set using external resistors.
Q6: Does TPS3851H50EDRBR have an adjustable reset delay time? A6: No, TPS3851H50EDRBR does not have an adjustable reset delay time. It has a fixed delay time of approximately 50ms.
Q7: Can TPS3851H50EDRBR tolerate voltage transients or spikes? A7: Yes, TPS3851H50EDRBR has built-in hysteresis and can tolerate voltage transients or spikes within its specified operating range.
Q8: What is the output type of TPS3851H50EDRBR? A8: TPS3851H50EDRBR has an active-low push-pull output.
Q9: Can TPS3851H50EDRBR be used in automotive applications? A9: Yes, TPS3851H50EDRBR is AEC-Q100 qualified and can be used in automotive applications.
Q10: Is TPS3851H50EDRBR available in a small package? A10: Yes, TPS3851H50EDRBR is available in a small 6-pin WSON package, making it suitable for space-constrained designs.
Please note that these answers are general and may vary depending on the specific requirements and datasheet of the TPS3851H50EDRBR.