Texas Instruments
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
TPS22921YFPR
Ver detalhes DataSheets

TPS22921YFPR

Product Overview

Category

The TPS22921YFPR belongs to the category of power management integrated circuits (PMICs).

Use

It is primarily used for managing power in electronic devices, specifically for load switching applications.

Characteristics

  • Low on-resistance
  • Fast switching speed
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Low quiescent current

Package

The TPS22921YFPR is available in a small 6-pin DSBGA package.

Essence

The essence of TPS22921YFPR lies in its ability to efficiently control the flow of power in electronic devices, ensuring optimal performance and protection against overcurrent and thermal issues.

Packaging/Quantity

The TPS22921YFPR is typically packaged in reels, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 1.5V to 5.5V
  • On-Resistance: 40mΩ (typical)
  • Quiescent Current: 0.5µA (typical)
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPS22921YFPR has the following pin configuration:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. GND: Ground pin
  4. PG: Power good indicator pin
  5. SW: Switch pin
  6. VOUT: Output voltage pin

Functional Features

  • Load switching capability
  • Power sequencing support
  • Power good indication
  • Overcurrent and thermal protection
  • Low power consumption in standby mode

Advantages and Disadvantages

Advantages

  • Low on-resistance ensures minimal power loss
  • Fast switching speed enhances overall system performance
  • Wide input voltage range allows compatibility with various power sources
  • Overcurrent and thermal protection safeguards the device and connected components

Disadvantages

  • Limited output current capacity
  • Relatively small package size may pose challenges in certain applications

Working Principles

The TPS22921YFPR operates by controlling the flow of power from the input voltage (VIN) to the output voltage (VOUT) based on the enable (EN) signal. When the EN pin is high, the switch (SW) is closed, allowing power to flow from VIN to VOUT. Conversely, when the EN pin is low, the switch is open, cutting off the power path.

Detailed Application Field Plans

The TPS22921YFPR finds application in various electronic devices that require efficient load switching and power management. Some potential application fields include:

  1. Mobile devices: Smartphones, tablets, portable gaming consoles.
  2. Wearable electronics: Smartwatches, fitness trackers.
  3. IoT devices: Home automation systems, sensor nodes.
  4. Portable audio/video devices: MP3 players, digital cameras.
  5. Battery-powered devices: Wireless keyboards, remote controls.

Detailed and Complete Alternative Models

  1. TPS22922YFPR: Similar to TPS22921YFPR but with a different pin configuration.
  2. TPS22923YFPR: Higher current handling capability compared to TPS22921YFPR.
  3. TPS22924YFPR: Lower on-resistance and improved thermal characteristics.

These alternative models offer similar functionality and can be considered as substitutes for the TPS22921YFPR depending on specific requirements.

Word count: 524 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de TPS22921YFPR em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of TPS22921YFPR in technical solutions:

  1. Q: What is TPS22921YFPR? A: TPS22921YFPR is a power distribution switch with an integrated load current monitoring feature.

  2. Q: What is the maximum input voltage supported by TPS22921YFPR? A: The maximum input voltage supported by TPS22921YFPR is 5.5V.

  3. Q: Can TPS22921YFPR handle high currents? A: Yes, TPS22921YFPR can handle a continuous current of up to 2A.

  4. Q: How does the load current monitoring feature work? A: The load current monitoring feature of TPS22921YFPR provides a voltage proportional to the load current, allowing for real-time monitoring.

  5. Q: Is TPS22921YFPR suitable for battery-powered applications? A: Yes, TPS22921YFPR is designed for low-power applications and is suitable for battery-powered systems.

  6. Q: Can TPS22921YFPR be used in automotive applications? A: Yes, TPS22921YFPR is qualified for automotive applications and can operate in harsh environments.

  7. Q: Does TPS22921YFPR have built-in protection features? A: Yes, TPS22921YFPR includes features like overcurrent protection, thermal shutdown, and reverse current blocking.

  8. Q: What is the typical quiescent current of TPS22921YFPR? A: The typical quiescent current of TPS22921YFPR is very low, typically around 0.5µA.

  9. Q: Can TPS22921YFPR be used in space-constrained designs? A: Yes, TPS22921YFPR is available in a small package (e.g., DSBGA) that is suitable for space-constrained designs.

  10. Q: Are there any evaluation modules or reference designs available for TPS22921YFPR? A: Yes, Texas Instruments provides evaluation modules and reference designs to help users quickly prototype and implement TPS22921YFPR in their applications.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.