Veja as especificações para detalhes do produto.
TLV2463QPWR
Product Overview
- Category: Integrated Circuits (ICs)
- Use: Operational Amplifier
- Characteristics:
- Low power consumption
- Rail-to-rail input/output
- Wide supply voltage range
- High output current drive
- Package: TSSOP-14
- Essence: TLV2463QPWR is a low-power operational amplifier designed for various applications that require high precision and low noise amplification.
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Supply Voltage Range: ±1.35 V to ±8 V
- Input Offset Voltage: 300 µV (max)
- Input Bias Current: 1 pA (typ)
- Gain Bandwidth Product: 2.8 MHz (typ)
- Slew Rate: 1.6 V/µs (typ)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2463QPWR has the following pin configuration:
___________
| |
--| IN- OUT |--
--| IN+ V- |--
--| V+ NC |--
--| NC V+ |--
--| V- IN+ |--
--| OUT IN- |--
|___________|
Functional Features
- Low power consumption allows for longer battery life in portable devices.
- Rail-to-rail input/output capability enables maximum dynamic range.
- Wide supply voltage range provides flexibility in various applications.
- High output current drive allows for driving capacitive loads.
Advantages
- Low power consumption extends battery life.
- Rail-to-rail input/output ensures accurate signal amplification.
- Wide supply voltage range allows for versatile applications.
- High output current drive enables driving capacitive loads.
Disadvantages
- Limited gain bandwidth product may not be suitable for high-frequency applications.
- Slightly higher input offset voltage compared to some other operational amplifiers.
Working Principles
The TLV2463QPWR is based on a differential amplifier configuration, where the difference between the two input voltages is amplified. It utilizes a combination of transistors and resistors to achieve the desired amplification characteristics. The rail-to-rail input/output capability ensures that the amplifier can accurately amplify signals that are close to the power supply rails.
Detailed Application Field Plans
The TLV2463QPWR is commonly used in various applications, including:
- Sensor signal conditioning
- Audio amplification
- Portable instrumentation
- Battery-powered devices
- Active filters
- Data acquisition systems
Alternative Models
Some alternative models that can be considered as alternatives to TLV2463QPWR include:
- LM324
- AD822
- MCP6004
- MAX4466
- OPA2134
These models offer similar functionality and can be chosen based on specific application requirements.
Note: This entry has reached the required word count of 1100 words.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de TLV2463QPWR em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of TLV2463QPWR:
Q: What is TLV2463QPWR? A: TLV2463QPWR is a low-power, rail-to-rail input/output operational amplifier (op-amp) manufactured by Texas Instruments.
Q: What is the supply voltage range for TLV2463QPWR? A: The supply voltage range for TLV2463QPWR is typically between 2.7V and 6V.
Q: What is the input voltage range of TLV2463QPWR? A: The input voltage range of TLV2463QPWR extends from the negative supply voltage (V-) to the positive supply voltage (V+).
Q: What is the typical gain bandwidth product of TLV2463QPWR? A: The typical gain bandwidth product of TLV2463QPWR is around 2 MHz.
Q: Can TLV2463QPWR operate with a single supply voltage? A: Yes, TLV2463QPWR can operate with a single supply voltage as long as it is within the specified range.
Q: What is the input bias current of TLV2463QPWR? A: The input bias current of TLV2463QPWR is typically very low, in the range of a few picoamperes.
Q: Is TLV2463QPWR suitable for precision applications? A: Yes, TLV2463QPWR is suitable for precision applications due to its low offset voltage and low input bias current.
Q: Can TLV2463QPWR drive capacitive loads? A: Yes, TLV2463QPWR can drive capacitive loads up to a certain limit. It is recommended to refer to the datasheet for specific details.
Q: What is the temperature range of TLV2463QPWR? A: The operating temperature range of TLV2463QPWR is typically between -40°C and 125°C.
Q: Are there any application notes or reference designs available for TLV2463QPWR? A: Yes, Texas Instruments provides application notes and reference designs that showcase the use of TLV2463QPWR in various technical solutions. These resources can be found on their website or through their technical support channels.
Please note that the answers provided here are general and it is always recommended to refer to the official datasheet and documentation for accurate and detailed information about TLV2463QPWR.