Veja as especificações para detalhes do produto.
TLV2461AQDRG4
Product Overview
Category: Integrated Circuit (IC)
Use: Operational Amplifier (Op-Amp)
Characteristics: - Low power consumption - Rail-to-rail input and output - High precision - Wide bandwidth - Low offset voltage - Low noise
Package: SOIC-8
Essence: The TLV2461AQDRG4 is a high-performance, low-power operational amplifier designed for various applications that require precision amplification.
Packaging/Quantity: The TLV2461AQDRG4 is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 6V
- Input Offset Voltage: ±0.5mV (maximum)
- Input Bias Current: ±1pA (maximum)
- Gain Bandwidth Product: 10MHz
- Slew Rate: 6V/µs
- Quiescent Current: 900µA (typical)
- Operating Temperature Range: -40°C to 125°C
Pin Configuration
The TLV2461AQDRG4 has the following pin configuration:
___________
V+ | 1 8 | V-
IN-| 2 7 | OUT
IN+| 3 6 | NC
GND | 4 5 | NC
|__________|
Functional Features
- Low power consumption makes it suitable for battery-powered applications.
- Rail-to-rail input and output capability allows for maximum dynamic range.
- High precision ensures accurate signal amplification.
- Wide bandwidth enables the amplification of high-frequency signals.
- Low offset voltage minimizes errors in amplification.
- Low noise ensures clean and clear signal amplification.
Advantages and Disadvantages
Advantages: - Low power consumption extends battery life. - Rail-to-rail input and output capability provides maximum signal range. - High precision ensures accurate amplification. - Wide bandwidth allows for amplification of high-frequency signals. - Low offset voltage minimizes errors in amplification. - Low noise ensures clean and clear signal amplification.
Disadvantages: - Limited supply voltage range (2.7V to 6V). - Slightly higher quiescent current compared to some other op-amps.
Working Principles
The TLV2461AQDRG4 is based on a differential amplifier configuration, where the difference between the two input voltages is amplified. It utilizes a combination of transistors and resistors to achieve high gain and accuracy. The rail-to-rail input and output capability is achieved through specialized circuitry that allows the amplifier to operate close to the supply rails.
Detailed Application Field Plans
The TLV2461AQDRG4 is commonly used in various applications, including but not limited to: - Sensor signal conditioning - Audio amplification - Active filters - Data acquisition systems - Medical instrumentation - Portable devices
Detailed and Complete Alternative Models
Some alternative models to the TLV2461AQDRG4 include: - LM358 - MCP6001 - AD8605 - MAX4239
These alternatives offer similar functionality and characteristics, providing options for different design requirements.
Word count: 345 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de TLV2461AQDRG4 em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of TLV2461AQDRG4 in technical solutions:
Q1: What is TLV2461AQDRG4? A1: TLV2461AQDRG4 is a low-power, rail-to-rail input/output operational amplifier (op-amp) designed for general-purpose applications.
Q2: What is the supply voltage range for TLV2461AQDRG4? A2: The supply voltage range for TLV2461AQDRG4 is typically between 2.7V and 6V.
Q3: What is the input offset voltage of TLV2461AQDRG4? A3: The input offset voltage of TLV2461AQDRG4 is typically 500µV.
Q4: What is the input bias current of TLV2461AQDRG4? A4: The input bias current of TLV2461AQDRG4 is typically 1pA.
Q5: Can TLV2461AQDRG4 operate with a single supply voltage? A5: Yes, TLV2461AQDRG4 can operate with a single supply voltage as low as 2.7V.
Q6: What is the gain bandwidth product of TLV2461AQDRG4? A6: The gain bandwidth product of TLV2461AQDRG4 is typically 1MHz.
Q7: Is TLV2461AQDRG4 suitable for low-power applications? A7: Yes, TLV2461AQDRG4 is designed for low-power applications, consuming only a few microamps of quiescent current.
Q8: Can TLV2461AQDRG4 drive capacitive loads? A8: Yes, TLV2461AQDRG4 is capable of driving capacitive loads up to 100pF.
Q9: What is the temperature range for TLV2461AQDRG4? A9: The temperature range for TLV2461AQDRG4 is typically -40°C to +125°C.
Q10: What are some typical applications for TLV2461AQDRG4? A10: TLV2461AQDRG4 can be used in various applications such as sensor interfaces, battery-powered systems, portable instrumentation, and audio amplification.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.