Veja as especificações para detalhes do produto.
TLC4502AIDG4
Product Overview
- Category: Integrated Circuit (IC)
- Use: Amplifier
- Characteristics: Low-power, Rail-to-Rail Output, Precision Operational Amplifier
- Package: 8-SOIC (Small Outline Integrated Circuit)
- Essence: The TLC4502AIDG4 is a precision operational amplifier designed for low-power applications. It offers rail-to-rail output swing and operates from a single supply voltage as low as 1.8V.
- Packaging/Quantity: The TLC4502AIDG4 is available in a 2500-piece reel.
Specifications
- Supply Voltage: 1.8V to 5.5V
- Input Offset Voltage: ±0.5mV (maximum)
- Input Bias Current: ±1pA (maximum)
- Gain Bandwidth Product: 2.2MHz (typical)
- Slew Rate: 1.6V/μs (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLC4502AIDG4 has the following pin configuration:
___________
V+ | | V-
O | | I+
U | | O
T | | U
1 | | T
2 | | 3
A |___________| 4
Functional Features
- Low-power consumption: The TLC4502AIDG4 is designed to operate with minimal power requirements, making it suitable for battery-powered applications.
- Rail-to-rail output swing: The amplifier can drive signals close to both supply rails, maximizing the dynamic range of the output signal.
- Precision performance: With low input offset voltage and bias current, the TLC4502AIDG4 provides accurate amplification of small signals.
- Single-supply operation: The amplifier can operate from a single supply voltage as low as 1.8V, making it compatible with low-voltage systems.
Advantages and Disadvantages
Advantages: - Low-power consumption - Rail-to-rail output swing - Precision performance - Single-supply operation
Disadvantages: - Limited gain bandwidth product compared to some other operational amplifiers - Slightly higher input offset voltage compared to certain precision amplifiers
Working Principles
The TLC4502AIDG4 is based on a differential amplifier configuration that amplifies the voltage difference between its two input terminals. It utilizes internal circuitry to provide rail-to-rail output swing and operates with minimal power consumption.
Application Field Plans
The TLC4502AIDG4 is suitable for various applications, including but not limited to: - Battery-powered devices - Portable instrumentation - Sensor signal conditioning - Audio amplification - Industrial control systems
Alternative Models
Some alternative models that offer similar functionality to the TLC4502AIDG4 include: - LMV321 - MCP6002 - MAX44246
These models can be considered as alternatives depending on specific application requirements.
Word count: 346 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de TLC4502AIDG4 em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of TLC4502AIDG4 in technical solutions:
Q: What is the TLC4502AIDG4? A: The TLC4502AIDG4 is a dual operational amplifier designed for general-purpose applications.
Q: What is the supply voltage range for the TLC4502AIDG4? A: The supply voltage range for the TLC4502AIDG4 is typically between 2.7V and 5.5V.
Q: What is the input offset voltage of the TLC4502AIDG4? A: The input offset voltage of the TLC4502AIDG4 is typically around 1mV.
Q: Can the TLC4502AIDG4 operate in single-supply mode? A: Yes, the TLC4502AIDG4 can operate in both single-supply and dual-supply modes.
Q: What is the typical gain bandwidth product of the TLC4502AIDG4? A: The typical gain bandwidth product of the TLC4502AIDG4 is around 10MHz.
Q: Is the TLC4502AIDG4 suitable for low-power applications? A: Yes, the TLC4502AIDG4 has a low quiescent current consumption, making it suitable for low-power applications.
Q: Can the TLC4502AIDG4 be used in audio applications? A: Yes, the TLC4502AIDG4 can be used in audio applications such as audio amplifiers or headphone amplifiers.
Q: Does the TLC4502AIDG4 have built-in protection features? A: Yes, the TLC4502AIDG4 has built-in short-circuit and thermal protection features.
Q: What is the operating temperature range of the TLC4502AIDG4? A: The operating temperature range of the TLC4502AIDG4 is typically between -40°C and 125°C.
Q: Can the TLC4502AIDG4 be used in automotive applications? A: Yes, the TLC4502AIDG4 is qualified for automotive applications and meets the AEC-Q100 standard.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.