Texas Instruments
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
SN74LVC245APWG4
Ver detalhes DataSheets

SN74LVC245APWG4

Overview

  • Category: Integrated Circuit
  • Use: Level Shifter/Transceiver
  • Characteristics: Bi-directional voltage level translation, 3-state outputs, low power consumption
  • Package: TSSOP-20
  • Essence: Transfers data between different voltage domains
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • High-Level Input Voltage: 2V to VCC + 0.5V
  • Low-Level Input Voltage: -0.5V to 0.8V
  • High-Level Output Voltage: VCC - 0.5V
  • Low-Level Output Voltage: 0.5V
  • Maximum Operating Frequency: 100MHz

Pin Configuration

The SN74LVC245APWG4 has a total of 20 pins. The pin configuration is as follows:

  1. DIR (Direction Control)
  2. OE (Output Enable)
  3. A1 (Data Input/Output)
  4. B1 (Data Input/Output)
  5. A2 (Data Input/Output)
  6. B2 (Data Input/Output)
  7. A3 (Data Input/Output)
  8. B3 (Data Input/Output)
  9. A4 (Data Input/Output)
  10. B4 (Data Input/Output)
  11. GND (Ground)
  12. B5 (Data Input/Output)
  13. A5 (Data Input/Output)
  14. B6 (Data Input/Output)
  15. A6 (Data Input/Output)
  16. B7 (Data Input/Output)
  17. A7 (Data Input/Output)
  18. B8 (Data Input/Output)
  19. A8 (Data Input/Output)
  20. VCC (Supply Voltage)

Functional Features

  • Bi-directional voltage level translation between two voltage domains
  • 3-state outputs allow multiple devices to share a common bus
  • Low power consumption for energy-efficient operation

Advantages and Disadvantages

Advantages: - Enables communication between devices operating at different voltage levels - Supports bidirectional data transfer - Allows for easy integration into existing systems - Low power consumption helps prolong battery life in portable devices

Disadvantages: - Limited maximum operating frequency compared to some other level shifters - Requires careful consideration of voltage compatibility to prevent damage to connected devices

Working Principles

The SN74LVC245APWG4 is designed to translate signals between two voltage domains. It features bidirectional data transfer, allowing information to flow in both directions. The direction of data transfer is controlled by the DIR pin. When DIR is set to logic high, data is transferred from A-side to B-side, and when DIR is set to logic low, data is transferred from B-side to A-side.

The OE pin enables or disables the outputs. When OE is set to logic high, the outputs are disabled and enter a high-impedance state, allowing other devices to drive the bus. When OE is set to logic low, the outputs are enabled and actively drive the bus.

Detailed Application Field Plans

The SN74LVC245APWG4 is commonly used in various applications where voltage level translation is required. Some typical application fields include:

  1. Microcontroller interfacing with peripherals operating at different voltage levels
  2. Communication between different logic families, such as TTL and CMOS
  3. Level shifting in mixed-voltage systems, such as automotive electronics
  4. Bus buffering and isolation in multi-device communication systems

Alternative Models

There are several alternative models available that offer similar functionality to the SN74LVC245APWG4. Some popular alternatives include:

  1. TXB0108PWR: 8-bit bidirectional voltage-level translator with automatic direction sensing
  2. PCA9306DCTR: Dual bidirectional I2C-bus and SMBus voltage-level translator
  3. SN74LVC4245APW: Octal bus transceiver with configurable voltage translation

These alternative models can be considered based on specific application requirements and compatibility with existing systems.

In conclusion, the SN74LVC245APWG4 is a versatile integrated circuit that enables bi-directional voltage level translation between different voltage domains. Its low power consumption, 3-state outputs, and compact TSSOP-20 package make it suitable for various applications in different industries.

Liste 10 perguntas e respostas comuns relacionadas à aplicação de SN74LVC245APWG4 em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of SN74LVC245APWG4:

  1. Q: What is SN74LVC245APWG4? A: SN74LVC245APWG4 is a bidirectional octal bus transceiver with 3-state outputs, commonly used in digital systems.

  2. Q: What is the voltage range supported by SN74LVC245APWG4? A: SN74LVC245APWG4 supports a voltage range from 1.65V to 5.5V.

  3. Q: How many channels does SN74LVC245APWG4 have? A: SN74LVC245APWG4 has 8 bidirectional channels.

  4. Q: Can SN74LVC245APWG4 be used for level shifting between different voltage domains? A: Yes, SN74LVC245APWG4 can be used for level shifting between different voltage domains due to its wide voltage range support.

  5. Q: What is the maximum data transfer rate supported by SN74LVC245APWG4? A: SN74LVC245APWG4 supports a maximum data transfer rate of 100 Mbps.

  6. Q: Does SN74LVC245APWG4 have built-in ESD protection? A: Yes, SN74LVC245APWG4 has built-in ESD protection, making it more robust against electrostatic discharge.

  7. Q: Can SN74LVC245APWG4 be used in both parallel and serial communication interfaces? A: Yes, SN74LVC245APWG4 can be used in both parallel and serial communication interfaces, depending on the application requirements.

  8. Q: Is SN74LVC245APWG4 compatible with TTL and CMOS logic levels? A: Yes, SN74LVC245APWG4 is compatible with both TTL and CMOS logic levels.

  9. Q: Can SN74LVC245APWG4 be used for level translation between different logic families? A: Yes, SN74LVC245APWG4 can be used for level translation between different logic families, such as between 3.3V and 5V systems.

  10. Q: What is the package type of SN74LVC245APWG4? A: SN74LVC245APWG4 comes in a TSSOP (Thin Shrink Small Outline Package) package type.

Please note that these answers are general and may vary depending on specific application requirements.