SN74AUP1G80DBVR

Product Overview

• Category: Integrated Circuit (IC)
• Use: Logic Gate
• Characteristics: Single Positive Edge-Triggered D-Type Flip-Flop
• Package: SOT-23-6
• Essence: High-speed, low-power consumption flip-flop
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage Range: 0.8V to 3.6V
• Input Voltage Range: -0.5V to VCC + 0.5V
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to 85°C
• Propagation Delay Time: 2.7 ns (typical)
• Maximum Clock Frequency: 500 MHz

Detailed Pin Configuration

The SN74AUP1G80DBVR has a total of six pins:

1. GND (Ground): Connected to the ground reference potential.
2. Q (Output): Provides the output signal of the flip-flop.
3. D (Data): Input pin for the data signal.
4. CP (Clock Pulse): Input pin for the clock signal.
5. PRE (Preset): Input pin for presetting the flip-flop.
6. CLR (Clear): Input pin for clearing the flip-flop.

Functional Features

• Single positive edge-triggered D-type flip-flop with asynchronous clear and preset functionality.
• High-speed operation with low power consumption.
• Wide supply voltage range allows compatibility with various systems.
• Small package size enables space-saving designs.
• Suitable for applications requiring high-speed data storage and synchronization.

Advantages and Disadvantages

Advantages: - High-speed operation ensures efficient data processing. - Low power consumption reduces energy requirements. - Wide supply voltage range enhances compatibility. - Small package size allows for compact designs.

Disadvantages: - Limited number of flip-flops in a single package. - Lack of additional advanced features compared to more complex flip-flop ICs.

Working Principles

The SN74AUP1G80DBVR is a positive edge-triggered D-type flip-flop. It stores and synchronizes data based on the rising edge of the clock signal (CP). The input data (D) is transferred to the output (Q) when the clock signal transitions from low to high. The flip-flop can be cleared asynchronously using the CLR input or preset using the PRE input, allowing for flexible control over its state.

Detailed Application Field Plans

The SN74AUP1G80DBVR is commonly used in various applications, including:

1. Digital Communication Systems: Used for data synchronization and storage in high-speed communication systems.
2. Microcontrollers and Processors: Enables efficient data processing and synchronization in microcontroller-based systems.
3. Consumer Electronics: Suitable for use in portable devices, such as smartphones and tablets, where low power consumption and small form factor are essential.
4. Industrial Automation: Provides reliable data storage and synchronization in industrial control systems.
5. Automotive Electronics: Used in automotive applications, such as engine control units and infotainment systems, due to its high-speed operation and wide supply voltage range.

Detailed and Complete Alternative Models

1. SN74AUP1G80DCKR: Similar specifications and functionality but packaged in SC-70-6.
2. SN74LVC1G80DBVR: Low-voltage version with similar characteristics but operates at 1.65V to 5.5V supply voltage range.
3. SN74LV1G80DBVR: Another low-voltage alternative with comparable features but operates at 1.65V to 5.5V supply voltage range.

These alternative models provide similar functionality and can be used as replacements for the SN74AUP1G80DBVR in various applications.

Word count: 410 words