Texas Instruments
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
LP3972SQ-A413
Ver detalhes DataSheets

LP3972SQ-A413

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, low power consumption
  • Package: QFN (Quad Flat No-leads)
  • Essence: Regulator IC for voltage regulation
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The LP3972SQ-A413 has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. EN: Enable Pin
  3. VOUT: Output Voltage
  4. GND: Ground
  5. FB: Feedback Pin
  6. PG: Power Good Indicator
  7. SW: Switching Node
  8. BST: Boost Capacitor Connection
  9. AGND: Analog Ground
  10. SS: Soft Start Capacitor Connection
  11. COMP: Compensation Pin
  12. ISET: Current Limit Setting
  13. NC: No Connect
  14. NC: No Connect
  15. NC: No Connect
  16. NC: No Connect

Functional Features

  • High efficiency voltage regulation
  • Low power consumption
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator
  • Soft start functionality

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Compact package size saves board space
  • Power good indicator provides system status information

Disadvantages

  • Limited maximum output current of 1A
  • Dropout voltage of 200mV may affect performance in low input voltage scenarios

Working Principles

The LP3972SQ-A413 is a regulator IC that utilizes a switching converter topology to efficiently regulate the output voltage. It operates by continuously switching an internal power transistor on and off, controlling the energy flow from the input to the output. This switching action allows for high efficiency and low power dissipation.

Detailed Application Field Plans

The LP3972SQ-A413 is commonly used in various applications where voltage regulation is required. Some typical application fields include:

  1. Portable electronic devices: Smartphones, tablets, portable media players
  2. Battery-powered systems: Wearable devices, wireless sensors, IoT devices
  3. Industrial equipment: Test and measurement instruments, control systems
  4. Automotive electronics: Infotainment systems, navigation systems, lighting control

Detailed and Complete Alternative Models

  1. LP3972SQ-B413: Similar specifications, different pin configuration
  2. LP3972SQ-C413: Higher maximum output current, otherwise similar specifications
  3. LP3972SQ-D413: Lower dropout voltage, otherwise similar specifications

These alternative models provide flexibility in choosing the most suitable option based on specific requirements.

Word count: 411

Liste 10 perguntas e respostas comuns relacionadas à aplicação de LP3972SQ-A413 em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of LP3972SQ-A413 in technical solutions:

  1. Q: What is LP3972SQ-A413? A: LP3972SQ-A413 is a voltage regulator IC (integrated circuit) that provides multiple regulated outputs for various applications.

  2. Q: What are the key features of LP3972SQ-A413? A: LP3972SQ-A413 features multiple output voltages, low dropout voltage, high output accuracy, thermal shutdown protection, and overcurrent protection.

  3. Q: What are the typical applications of LP3972SQ-A413? A: LP3972SQ-A413 is commonly used in battery-powered devices, portable electronics, industrial control systems, and other applications requiring multiple regulated voltages.

  4. Q: How many output channels does LP3972SQ-A413 have? A: LP3972SQ-A413 has four independent output channels, each capable of providing a different regulated voltage.

  5. Q: What is the maximum input voltage supported by LP3972SQ-A413? A: The maximum input voltage supported by LP3972SQ-A413 is typically around 6V.

  6. Q: Can LP3972SQ-A413 handle high current loads? A: Yes, LP3972SQ-A413 can handle high current loads up to a certain limit, which depends on the specific configuration and thermal conditions.

  7. Q: Does LP3972SQ-A413 require any external components for operation? A: Yes, LP3972SQ-A413 requires external capacitors and resistors for stability and proper operation. The datasheet provides guidelines for component selection.

  8. Q: Is LP3972SQ-A413 suitable for low-power applications? A: Yes, LP3972SQ-A413 is designed to be efficient and suitable for low-power applications, helping to conserve battery life.

  9. Q: Does LP3972SQ-A413 have any built-in protection features? A: Yes, LP3972SQ-A413 includes thermal shutdown protection and overcurrent protection to safeguard the IC and connected components.

  10. Q: Can LP3972SQ-A413 operate in a wide temperature range? A: Yes, LP3972SQ-A413 is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.