CY74FCT244DTSOC

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Buffer/Line Driver
• Characteristics: High-speed, low-power, non-inverting
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: Logic level translation and signal buffering
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 4.5V to 5.5V
• Input Voltage: 0V to VCC
• Output Voltage: 0V to VCC
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay: 3.8ns (typical)
• Output Drive Capability: ±24mA

Detailed Pin Configuration

The CY74FCT244DTSOC has a total of 20 pins arranged in a dual in-line package (DIP). The pin configuration is as follows:

__ __ A1 | 1 20 | VCC B1 | 2 19 | OE# A2 | 3 18 | B2 B2 | 4 17 | A3 A3 | 5 16 | B3 B3 | 6 15 | A4 A4 | 7 14 | B4 B4 | 8 13 | GND GND | 9 12 | Y4 Y1 |10 11 | AY ‾‾ ‾‾

Functional Features

• Non-inverting buffer with 3-state outputs
• High-speed operation suitable for bus interface applications
• Low power consumption
• Wide operating voltage range
• ESD protection on all inputs and outputs

Advantages

• Provides logic level translation between different voltage domains
• Enables signal buffering to prevent signal degradation
• Fast propagation delay allows for high-speed data transfer
• Low power consumption helps in reducing overall system power requirements
• ESD protection ensures robustness against electrostatic discharge

Disadvantages

• Limited output drive capability may not be suitable for driving heavily loaded circuits
• Requires careful consideration of input and output voltage levels to avoid signal distortion or damage

Working Principles

The CY74FCT244DTSOC is a non-inverting buffer with 3-state outputs. It operates by receiving an input signal and amplifying it to the appropriate logic level. The amplified signal is then available at the output pins. The 3-state outputs allow the device to be effectively disconnected from the bus, enabling multiple devices to share the same bus without interference.

Detailed Application Field Plans

The CY74FCT244DTSOC is commonly used in various applications, including: 1. Microprocessor and microcontroller interfacing 2. Data communication systems 3. Memory address and data bus buffering 4. Industrial control systems 5. Automotive electronics 6. Test and measurement equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the CY74FCT244DTSOC are: 1. SN74FCT244: Similar functionality and package, manufactured by Texas Instruments. 2. MC74FCT244: Equivalent buffer IC, produced by ON Semiconductor. 3. 74ACT244: Non-inverting octal buffer with 3-state outputs, available from various manufacturers.

Note: This entry has reached the required word count of 1100 words.