The CD74HCT175M96 is an integrated circuit belonging to the category of digital logic flip-flops. It is widely used in various electronic devices and systems for storing and manipulating digital information. The CD74HCT175M96 is known for its high-speed operation and utilization of complementary metal-oxide-semiconductor (CMOS) technology.
The CD74HCT175M96 has the following specifications:
The CD74HCT175M96 has a total of 16 pins arranged as follows:
+---+--+---+
CLR |1 +--+ 16| VCC
D0 |2 15| Q0
D1 |3 14| Q1
D2 |4 13| Q2
D3 |5 12| Q3
GND |6 11| CP
CLK |7 10| PR
D/C |8 9| Q3'
+--------+
The CD74HCT175M96 offers the following functional features:
Advantages of the CD74HCT175M96 include:
Disadvantages of the CD74HCT175M96 include:
The CD74HCT175M96 operates based on the principles of sequential logic. Each flip-flop within the IC stores a single bit of digital information. The clock input (CP) controls the timing of data storage and retrieval. When the clock signal transitions from low to high, the current state of the D-input is captured and stored in the corresponding flip-flop. The stored data can be accessed through the complementary output pins (Q0, Q1, Q2, and Q3). The clear function (CLR) allows for the simultaneous reset of all flip-flops, while the asynchronous preset (PR) enables the presetting of the outputs.
The CD74HCT175M96 finds applications in various fields, including:
In addition to the CD74HCT175M96, there are several alternative models available that offer similar functionality. These include:
Sure! Here are 10 common questions and answers related to the application of CD74HCT175M96 in technical solutions:
Q: What is CD74HCT175M96? A: CD74HCT175M96 is a quad D-type flip-flop integrated circuit (IC) that can store and manipulate digital data.
Q: What is the operating voltage range for CD74HCT175M96? A: The operating voltage range for CD74HCT175M96 is typically between 2V and 6V.
Q: What is the maximum clock frequency supported by CD74HCT175M96? A: CD74HCT175M96 can support clock frequencies up to 25 MHz.
Q: How many flip-flops are there in CD74HCT175M96? A: CD74HCT175M96 contains four independent D-type flip-flops.
Q: What is the output drive capability of CD74HCT175M96? A: CD74HCT175M96 has a typical output drive capability of ±4 mA.
Q: Can CD74HCT175M96 be used in both synchronous and asynchronous applications? A: Yes, CD74HCT175M96 can be used in both synchronous and asynchronous applications.
Q: What is the power dissipation of CD74HCT175M96? A: The power dissipation of CD74HCT175M96 is typically around 20 mW.
Q: Does CD74HCT175M96 have any built-in protection features? A: Yes, CD74HCT175M96 has built-in diode clamps to protect against electrostatic discharge (ESD).
Q: What is the temperature range for CD74HCT175M96? A: CD74HCT175M96 can operate within a temperature range of -40°C to 85°C.
Q: Can CD74HCT175M96 be used in battery-powered applications? A: Yes, CD74HCT175M96 can be used in battery-powered applications as it has a low power consumption.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for CD74HCT175M96.