CD4034BPWE4

Product Overview

Category

CD4034BPWE4 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for various applications, including digital counters, frequency dividers, and shift registers.

Characteristics

• CD4034BPWE4 is a 12-stage static shift register.
• It operates at a wide voltage range, typically between 3V and 18V.
• The IC has a high noise immunity, making it suitable for use in noisy environments.
• It offers low power consumption, making it energy-efficient.
• CD4034BPWE4 is designed to be compatible with both TTL and CMOS logic levels.

Package

The CD4034BPWE4 is available in a standard 16-pin wide SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of CD4034BPWE4 lies in its ability to store and shift data in a sequential manner, making it an essential component in digital circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Supply Voltage: 3V to 18V
• Operating Temperature Range: -40°C to +85°C
• Input Voltage High Level (VIH): 2V (minimum)
• Input Voltage Low Level (VIL): 0.8V (maximum)
• Output Voltage High Level (VOH): 90% of VDD (minimum)
• Output Voltage Low Level (VOL): 10% of VDD (maximum)

Detailed Pin Configuration

The CD4034BPWE4 has a total of 16 pins, each serving a specific function. Here is the detailed pin configuration:

1. QA: Output of stage A
2. QB: Output of stage B
3. QC: Output of stage C
4. QD: Output of stage D
5. QE: Output of stage E
6. QF: Output of stage F
7. QG: Output of stage G
8. QH: Output of stage H
9. MR: Master Reset (active LOW)
10. CP: Clock Pulse Input
11. DS: Serial Data Input
12. OE: Output Enable (active LOW)
13. VDD: Positive Power Supply
14. GND: Ground
15. QH' (Bar): Complement output of stage H
16. SER: Serial Data Output

Functional Features

• CD4034BPWE4 can be cascaded to form larger shift registers, allowing for expanded data storage capacity.
• It has a master reset function that clears all stages simultaneously.
• The IC supports both serial and parallel data input modes.
• CD4034BPWE4 offers a wide operating voltage range, making it versatile for various applications.
• It has a high-speed clock pulse input, enabling efficient data shifting.

Advantages and Disadvantages

Advantages

• Wide operating voltage range allows for compatibility with different systems.
• Low power consumption makes it energy-efficient.
• High noise immunity ensures reliable performance in noisy environments.
• Versatile functionality enables use in various digital circuit applications.

Disadvantages

• Limited number of stages (12) may not be sufficient for certain complex applications.
• Lack of built-in error detection or correction mechanisms.

Working Principles

CD4034BPWE4 operates based on the principle of sequential data storage and shifting. It consists of 12 flip-flops connected in series, forming a shift register. The clock pulse input (CP) controls the shifting of data from one stage to another. The serial data input (DS) allows new data to enter the first stage, while the output enable (OE) pin enables or disables the outputs. The master reset (MR) pin clears all stages simultaneously.

Detailed Application Field Plans

CD4034BPWE4 finds applications in various fields, including: - Digital frequency dividers - Industrial automation systems - Data communication equipment - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to CD4034BPWE4 include: - CD4021B: 8-stage static shift register - CD4015B: Dual 4-stage static shift register - CD4094B: 8-stage shift-and-store bus register - CD4517B: Dual 64-bit static shift register

These alternative models offer similar functionality but may have different specifications and pin configurations.

Word count: 550 words