STMicroelectronics
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
VNQ7003SYTR
Ver detalhes DataSheets

VNQ7003SYTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Driver for Automotive Applications
  • Characteristics: High current capability, low power dissipation, compact package size
  • Package: Surface Mount Technology (SMT), 16-pin package
  • Essence: Efficiently drives loads in automotive systems while minimizing power loss
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 5V to 36V
  • Output Current: Up to 7A
  • Operating Temperature Range: -40°C to +150°C
  • Input Logic Compatibility: CMOS/TTL

Detailed Pin Configuration

  1. IN1: Input 1
  2. IN2: Input 2
  3. GND: Ground
  4. OUT1: Output 1
  5. OUT2: Output 2
  6. VCC: Supply Voltage
  7. EN: Enable
  8. DIAG: Diagnostic Output
  9. NC: No Connection
  10. NC: No Connection
  11. NC: No Connection
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. VS: Sense Voltage

Functional Features

  • High current capability allows driving of heavy loads
  • Low power dissipation ensures efficient operation
  • Built-in diagnostic features for fault detection and protection
  • Enable pin for easy control of the device
  • Sense voltage pin for accurate load monitoring

Advantages and Disadvantages

Advantages: - High current capability enables driving of various automotive loads - Low power dissipation reduces energy consumption - Diagnostic features enhance system reliability - Compact package size saves board space

Disadvantages: - Limited input logic compatibility (CMOS/TTL only) - Operating temperature range may not be suitable for extreme environments

Working Principles

The VNQ7003SYTR is a power driver IC designed specifically for automotive applications. It utilizes high current capability to efficiently drive loads such as motors, solenoids, and lamps in automotive systems. The device operates by receiving control signals through the input pins (IN1 and IN2) and amplifying them to provide the necessary current to the output pins (OUT1 and OUT2). The enable pin (EN) allows easy activation or deactivation of the device, while the diagnostic output (DIAG) provides information about any detected faults.

Detailed Application Field Plans

The VNQ7003SYTR finds extensive use in various automotive applications, including:

  1. Electric Power Steering Systems
  2. Automotive Lighting Systems
  3. HVAC (Heating, Ventilation, and Air Conditioning) Systems
  4. Engine Cooling Fans
  5. Window Control Systems
  6. Door Locking Mechanisms

Detailed and Complete Alternative Models

  1. VNQ7003S: Similar specifications and features, but with a different package type (DIP-16)
  2. VNQ7003SY: Same package and specifications, but without diagnostic features
  3. VNQ7003SYTR-E: Enhanced version with extended operating temperature range (-40°C to +175°C)

(Note: This list is not exhaustive and other alternative models may exist.)

Word count: 334 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de VNQ7003SYTR em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of VNQ7003SYTR in technical solutions:

  1. Question: What is VNQ7003SYTR?
    - Answer: VNQ7003SYTR is a high-side driver IC (Integrated Circuit) designed for automotive applications.

  2. Question: What is the maximum voltage rating of VNQ7003SYTR?
    - Answer: The maximum voltage rating of VNQ7003SYTR is typically 36V.

  3. Question: What is the maximum current rating of VNQ7003SYTR?
    - Answer: The maximum current rating of VNQ7003SYTR is typically 7A.

  4. Question: What is the purpose of using VNQ7003SYTR in technical solutions?
    - Answer: VNQ7003SYTR is commonly used as a high-side switch or driver for controlling loads such as motors, solenoids, lamps, and other automotive components.

  5. Question: Can VNQ7003SYTR be used in both low-side and high-side configurations?
    - Answer: No, VNQ7003SYTR is specifically designed for high-side switching applications only.

  6. Question: Does VNQ7003SYTR have built-in protection features?
    - Answer: Yes, VNQ7003SYTR includes various protection features like over-temperature shutdown, overcurrent protection, and short-circuit protection.

  7. Question: What is the operating temperature range of VNQ7003SYTR?
    - Answer: The operating temperature range of VNQ7003SYTR is typically -40°C to +150°C.

  8. Question: Can VNQ7003SYTR be used in non-automotive applications?
    - Answer: While VNQ7003SYTR is primarily designed for automotive applications, it can also be used in other industrial and high-power applications.

  9. Question: What is the package type of VNQ7003SYTR?
    - Answer: VNQ7003SYTR is available in a PowerSSO-36 package.

  10. Question: Are there any recommended external components to use with VNQ7003SYTR?
    - Answer: Yes, it is recommended to use external components like decoupling capacitors and resistors as per the application requirements and datasheet guidelines.

Please note that the answers provided here are general and may vary depending on specific application requirements and the manufacturer's recommendations.