Veja as especificações para detalhes do produto.
VN7050AS-E
Product Overview
Category: Integrated Circuit (IC)
Use: The VN7050AS-E is a high-performance power driver IC designed for controlling inductive loads in automotive applications. It is specifically developed to drive resistive, capacitive, and inductive loads such as solenoids, relays, valves, and motors.
Characteristics: - High current capability - Low saturation voltage - Overtemperature protection - Short-circuit protection - Reverse battery protection - ESD protection
Package: The VN7050AS-E is available in a compact surface-mount package, allowing for easy integration into various electronic systems.
Essence: This IC serves as a crucial component in automotive electronics, providing reliable and efficient control of inductive loads.
Packaging/Quantity: The VN7050AS-E is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Supply Voltage Range: 4.5V to 36V
- Output Current: Up to 7A
- On-State Resistance: 0.1Ω (typical)
- Operating Temperature Range: -40°C to +150°C
- Standby Current: 10μA (maximum)
Detailed Pin Configuration
The VN7050AS-E features a multi-pin configuration, including the following pins:
- VCC: Power supply input
- GND: Ground reference
- IN: Input pin for control signal
- OUT: Output pin connected to the load
- EN: Enable pin for turning on/off the output
- FAULT: Fault indication pin
- DIAG: Diagnostic output pin
Functional Features
- High Current Capability: The VN7050AS-E can handle high currents up to 7A, making it suitable for driving various inductive loads.
- Low Saturation Voltage: The IC exhibits low saturation voltage, minimizing power dissipation and improving overall efficiency.
- Overtemperature Protection: It incorporates overtemperature protection to prevent damage due to excessive heat.
- Short-Circuit Protection: The IC features built-in short-circuit protection, safeguarding the load and the driver from potential damage.
- Reverse Battery Protection: Reverse battery protection ensures the IC remains unaffected by reverse polarity connections.
- ESD Protection: The VN7050AS-E is equipped with electrostatic discharge (ESD) protection, enhancing its robustness against static electricity.
Advantages and Disadvantages
Advantages: - High current handling capability - Low power dissipation - Comprehensive protection features - Wide operating temperature range - Compact package for easy integration
Disadvantages: - Limited output current compared to some specialized power driver ICs - May require additional external components for specific applications
Working Principles
The VN7050AS-E operates based on a combination of internal circuitry and control signals received at the input pin. When the control signal is applied, the IC switches on, allowing current to flow through the load connected to the output pin. The IC continuously monitors the load conditions and provides protection against faults such as overtemperature and short-circuits.
Detailed Application Field Plans
The VN7050AS-E finds extensive application in the automotive industry, particularly in electronic systems that require precise control of inductive loads. Some notable application fields include:
- Automotive lighting systems
- Engine management systems
- Powertrain control modules
- Climate control systems
- Electric power steering systems
- Transmission control units
Detailed and Complete Alternative Models
- VN7060AS-E: Similar to VN7050AS-E but with higher output current capability (up to 10A).
- VN7040AS-E: Similar to VN7050AS-E but with lower output current capability (up to 5A).
- VN7070AS-E: Similar to VN7050AS-E but with additional diagnostic features for enhanced fault detection.
These alternative models offer flexibility in choosing the appropriate power driver IC based on specific application requirements.
Word count: 550 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de VN7050AS-E em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of VN7050AS-E in technical solutions:
Q: What is the VN7050AS-E? A: The VN7050AS-E is a high-side driver designed for automotive applications, capable of driving resistive, capacitive, and inductive loads.
Q: What are the key features of the VN7050AS-E? A: The key features include over-temperature protection, short-circuit protection, under-voltage lockout, and diagnostic feedback.
Q: What is the maximum load current that the VN7050AS-E can handle? A: The VN7050AS-E can handle a maximum load current of 5A.
Q: Can the VN7050AS-E be used in both 12V and 24V systems? A: Yes, the VN7050AS-E is designed to operate in both 12V and 24V systems.
Q: Is the VN7050AS-E compatible with microcontrollers and other control devices? A: Yes, the VN7050AS-E can be easily controlled by microcontrollers and other control devices through its input pins.
Q: Does the VN7050AS-E have built-in protection features? A: Yes, the VN7050AS-E has built-in over-temperature protection, short-circuit protection, and under-voltage lockout to ensure safe operation.
Q: Can the VN7050AS-E be used in automotive lighting applications? A: Yes, the VN7050AS-E is commonly used in automotive lighting applications such as LED headlights, taillights, and interior lighting.
Q: What is the operating temperature range of the VN7050AS-E? A: The VN7050AS-E can operate within a temperature range of -40°C to 150°C.
Q: Can the VN7050AS-E be used in both AC and DC applications? A: No, the VN7050AS-E is specifically designed for DC applications and should not be used with AC power sources.
Q: Are there any evaluation boards or reference designs available for the VN7050AS-E? A: Yes, STMicroelectronics provides evaluation boards and reference designs that can help users quickly prototype and implement the VN7050AS-E in their technical solutions.
Please note that these answers are general and may vary depending on specific application requirements.