SI5338N-B06178-GMR

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Clock Generator and Multiplier
• Characteristics: Low jitter, high frequency accuracy, programmable output frequencies
• Package: 48-pin QFN (Quad Flat No-Lead)
• Essence: Clock generation and multiplication for various electronic systems
• Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications and Parameters

• Input Voltage Range: 2.375V to 3.63V
• Output Frequency Range: 1kHz to 808MHz
• Output Format: LVCMOS, LVDS, HCSL, or LVPECL
• Programmable Features: Output frequency, output format, spread spectrum modulation, etc.
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

1. VDDO: Output Power Supply
2. VDDI: Input Power Supply
3. GND: Ground
4. XAXB: Crystal Oscillator Input
5. XAXT: Crystal Oscillator Output
6. CLKIN: External Clock Input
7. CLKOUT0: Programmable Clock Output 0
8. CLKOUT1: Programmable Clock Output 1
9. CLKOUT2: Programmable Clock Output 2
10. CLKOUT3: Programmable Clock Output 3
11. CLKOUT4: Programmable Clock Output 4
12. CLKOUT5: Programmable Clock Output 5
13. CLKOUT6: Programmable Clock Output 6
14. CLKOUT7: Programmable Clock Output 7
15. SDA: I2C Serial Data Input
16. SCL: I2C Serial Clock Input
17. VDDA: Analog Power Supply
18. VDDP: Power Supply for PLL
19. VDDPLL: Power Supply for PLL
20. GNDPLL: Ground for PLL
21. NC: No Connection
22. NC: No Connection
23. NC: No Connection
24. NC: No Connection
25. NC: No Connection
26. NC: No Connection
27. NC: No Connection
28. NC: No Connection
29. NC: No Connection
30. NC: No Connection
31. NC: No Connection
32. NC: No Connection
33. NC: No Connection
34. NC: No Connection
35. NC: No Connection
36. NC: No Connection
37. NC: No Connection
38. NC: No Connection
39. NC: No Connection
40. NC: No Connection
41. NC: No Connection
42. NC: No Connection
43. NC: No Connection
44. NC: No Connection
45. NC: No Connection
46. NC: No Connection
47. NC: No Connection
48. NC: No Connection

Functional Characteristics

• Flexible clock generation and multiplication
• Low jitter and high frequency accuracy
• Programmable output frequencies and formats
• Spread spectrum modulation capability
• I2C interface for configuration and control

Advantages and Disadvantages

Advantages: - Wide input voltage range - High output frequency range - Programmable features for customization - Low jitter for improved system performance

Disadvantages: - Requires external crystal oscillator or clock input - Limited number of programmable clock outputs

Applicable Range of Products

• Telecommunications equipment
• Networking devices
• Data storage systems
• Industrial automation
• Consumer electronics

Working Principles

The SI5338N-B06178-GMR is a clock generator and multiplier IC that generates multiple clock signals with programmable frequencies and formats. It can accept an external clock input or use an internal crystal oscillator to generate the base clock signal. The IC then uses a phase-locked loop (PLL) to multiply the base clock frequency and generate multiple output clocks. The output frequencies and formats can be programmed using the I2C interface.

Detailed Application Field Plans

1. Telecommunications Equipment: Use the SI5338N-B06178-GMR to generate clock signals for high-speed data transmission and synchronization in communication systems.
2. Networking Devices: Utilize the IC to provide accurate clock signals for network switches, routers, and other networking equipment.
3. Data Storage Systems: Employ the SI5338N-B06178-GMR to generate precise clock signals for data storage devices such as hard drives and solid-state drives.
4. Industrial Automation: Use the IC to synchronize various components and subsystems in industrial automation systems, ensuring precise timing and coordination.
5. Consumer Electronics: Incorporate the SI5338N-B06178-GMR into consumer electronic devices that require accurate clock signals, such as audio/video equipment and gaming consoles.

Detailed Alternative Models

• SI5338A