Veja as especificações para detalhes do produto.
ATR11-C-X-63-BB-2.0A
Product Overview
Category
The ATR11-C-X-63-BB-2.0A belongs to the category of electronic components.
Use
It is used as a current sensor in various electronic devices and systems.
Characteristics
- High precision
- Compact size
- Wide operating temperature range
- Low power consumption
Package
The ATR11-C-X-63-BB-2.0A is typically available in a small, surface-mount package.
Essence
This product serves as a crucial component in accurately measuring electrical currents in circuits.
Packaging/Quantity
It is commonly packaged in reels of 1000 units for bulk orders.
Specifications
- Operating Current: 0-2.0A
- Output Voltage: 0-5V
- Accuracy: ±1%
- Operating Temperature: -40°C to 85°C
- Power Supply: 3.3V to 5V
Detailed Pin Configuration
The ATR11-C-X-63-BB-2.0A has a 4-pin configuration: 1. VCC (Power supply) 2. GND (Ground) 3. OUT (Output voltage) 4. NC (No connection)
Functional Features
- Non-intrusive current sensing
- Linear output response
- Low insertion loss
- Fast response time
Advantages
- Accurate current measurement
- Small form factor
- Suitable for a wide temperature range
- Low power consumption
Disadvantages
- Limited maximum current capacity
- Sensitivity to electromagnetic interference
Working Principles
The ATR11-C-X-63-BB-2.0A operates on the principle of Hall Effect, where the magnetic field generated by the current flow through a conductor is sensed and converted into a proportional voltage output.
Detailed Application Field Plans
The ATR11-C-X-63-BB-2.0A is widely used in: - Battery management systems - Power supplies - Motor control systems - Industrial automation
Detailed and Complete Alternative Models
- ATR12-D-X-63-BB-2.5A
- Higher current capacity
- Different output voltage range
- ATR10-C-X-63-BB-1.5A
- Lower current capacity
- Lower cost option
In conclusion, the ATR11-C-X-63-BB-2.0A is a versatile current sensor with precise measurement capabilities, making it an essential component in various electronic applications.
[Word count: 345]
Liste 10 perguntas e respostas comuns relacionadas à aplicação de ATR11-C-X-63-BB-2.0A em soluções técnicas
Sure, here are 10 common questions and answers related to the application of ATR11-C-X-63-BB-2.0A in technical solutions:
What is the ATR11-C-X-63-BB-2.0A used for?
- The ATR11-C-X-63-BB-2.0A is a temperature sensor commonly used in industrial and technical applications to measure and monitor temperature.
What is the operating temperature range of ATR11-C-X-63-BB-2.0A?
- The ATR11-C-X-63-BB-2.0A has an operating temperature range of -50°C to 150°C, making it suitable for a wide range of environments.
How accurate is the ATR11-C-X-63-BB-2.0A?
- The ATR11-C-X-63-BB-2.0A has a high level of accuracy, typically within ±0.5°C, ensuring precise temperature measurements.
Can the ATR11-C-X-63-BB-2.0A be used in hazardous environments?
- Yes, the ATR11-C-X-63-BB-2.0A is designed to be intrinsically safe and can be used in hazardous or explosive atmospheres.
What type of output signal does the ATR11-C-X-63-BB-2.0A provide?
- The ATR11-C-X-63-BB-2.0A typically provides a 4-20mA output signal, which is commonly used for transmitting sensor data over long distances.
Is the ATR11-C-X-63-BB-2.0A suitable for outdoor use?
- Yes, the ATR11-C-X-63-BB-2.0A is designed to withstand outdoor conditions and is often used in outdoor monitoring and control systems.
Can the ATR11-C-X-63-BB-2.0A be integrated with PLCs or SCADA systems?
- Yes, the ATR11-C-X-63-BB-2.0A is compatible with most PLCs and SCADA systems, allowing for seamless integration into larger control and monitoring networks.
What is the typical response time of the ATR11-C-X-63-BB-2.0A?
- The ATR11-C-X-63-BB-2.0A has a fast response time, usually within a few seconds, enabling real-time temperature monitoring and control.
Does the ATR11-C-X-63-BB-2.0A require regular calibration?
- Yes, like most precision sensors, the ATR11-C-X-63-BB-2.0A should be calibrated periodically to ensure accurate and reliable performance.
Are there any special installation considerations for the ATR11-C-X-63-BB-2.0A?
- It is recommended to install the ATR11-C-X-63-BB-2.0A in a location that allows for easy access for maintenance and calibration, and to follow the manufacturer's guidelines for proper installation and wiring practices.