Veja as especificações para detalhes do produto.
JANTX1N4982US.TR Encyclopedia Entry
Product Overview
Category
The JANTX1N4982US.TR belongs to the category of semiconductor devices.
Use
It is commonly used as a high-reliability diode for various electronic applications.
Characteristics
- High reliability
- Low forward voltage drop
- Fast switching speed
- High temperature operation capability
Package
The JANTX1N4982US.TR is typically available in a DO-41 package.
Essence
This diode is essential for providing reliable and efficient rectification and signal modulation in electronic circuits.
Packaging/Quantity
It is usually packaged in reels with varying quantities depending on the manufacturer's specifications.
Specifications
- Maximum Forward Voltage: 1.0V
- Reverse Voltage: 100V
- Forward Current: 1A
- Operating Temperature Range: -65°C to +175°C
Detailed Pin Configuration
The JANTX1N4982US.TR has two pins, an anode, and a cathode. The anode is connected to the P-type semiconductor material, while the cathode is connected to the N-type semiconductor material.
Functional Features
- Rectification of AC signals
- Signal modulation
- Overvoltage protection
Advantages and Disadvantages
Advantages
- High reliability makes it suitable for critical applications
- Low forward voltage drop reduces power dissipation
- Fast switching speed allows for efficient signal modulation
Disadvantages
- Limited reverse voltage compared to some other diodes
- Relatively low forward current rating
Working Principles
The JANTX1N4982US.TR operates based on the principles of semiconductor physics, utilizing the properties of P-N junctions to allow current flow in one direction while blocking it in the opposite direction.
Detailed Application Field Plans
The JANTX1N4982US.TR is widely used in: - Power supply units - Signal modulation circuits - Overvoltage protection systems
Detailed and Complete Alternative Models
- 1N4148: A general-purpose switching diode with similar characteristics
- 1N4001: A higher voltage rectifier diode suitable for different applications
- 1N5819: Schottky diode with fast switching speed and low forward voltage drop
This comprehensive entry provides detailed information about the JANTX1N4982US.TR, covering its product category, basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de JANTX1N4982US.TR em soluções técnicas
What is the JANTX1N4982US.TR?
- The JANTX1N4982US.TR is a high-reliability, military-grade diode designed for use in demanding technical applications.
What are the key specifications of the JANTX1N4982US.TR?
- The JANTX1N4982US.TR features a forward voltage drop of 1.0V, a reverse voltage of 200V, and a maximum forward current of 1A.
In what type of technical solutions is the JANTX1N4982US.TR commonly used?
- This diode is commonly used in aerospace, defense, and other high-reliability applications where consistent performance under extreme conditions is required.
What are the temperature range and storage conditions for the JANTX1N4982US.TR?
- The JANTX1N4982US.TR is designed to operate within a temperature range of -65°C to +175°C and should be stored in a dry environment at room temperature.
Does the JANTX1N4982US.TR require any special handling during assembly or installation?
- Yes, it is recommended to follow standard ESD (electrostatic discharge) precautions when handling and installing the JANTX1N4982US.TR to prevent damage.
Can the JANTX1N4982US.TR be used in high-frequency applications?
- Yes, this diode is suitable for high-frequency applications due to its fast switching characteristics and low capacitance.
What are the potential failure modes of the JANTX1N4982US.TR?
- Common failure modes include excessive reverse voltage, overcurrent, and exposure to environmental stresses beyond its specified limits.
Are there any known reliability issues with the JANTX1N4982US.TR?
- The JANTX1N4982US.TR is designed for high reliability and undergoes rigorous testing to ensure consistent performance in demanding environments.
Can the JANTX1N4982US.TR be replaced with a commercial-grade diode in non-military applications?
- While possible, it's important to consider the specific requirements and environmental conditions of the application before substituting with a commercial-grade diode.
Where can I find detailed technical documentation for the JANTX1N4982US.TR?
- Detailed technical documentation, including datasheets and application notes, can be obtained from the manufacturer or authorized distributors of the JANTX1N4982US.TR.