Semtech Corporation
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
1N4481US
Ver detalhes DataSheets

1N4481US

Product Overview

Category

The 1N4481US belongs to the category of semiconductor devices, specifically a rectifier diode.

Use

It is commonly used in electronic circuits to convert alternating current (AC) to direct current (DC).

Characteristics

  • Forward Voltage: 1V
  • Reverse Voltage: 50V
  • Current Rating: 1A
  • Fast Switching Speed

Package

The 1N4481US is typically available in a DO-41 package.

Essence

This rectifier diode is essential for converting AC to DC in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes and is available in quantities ranging from hundreds to thousands per package.

Specifications

  • Forward Voltage: 1V
  • Reverse Voltage: 50V
  • Average Rectified Current: 1A
  • Maximum Surge Current: 30A
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The 1N4481US has two pins, an anode and a cathode. The anode is connected to the positive terminal of the circuit, while the cathode is connected to the negative terminal.

Functional Features

  • High forward surge capability
  • Low forward voltage drop
  • Fast switching speed
  • High reliability

Advantages

  • Efficient conversion of AC to DC
  • Fast response time
  • Reliable performance

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitive to temperature variations

Working Principles

When a positive voltage is applied to the anode with respect to the cathode, the diode allows current to flow, effectively converting AC to DC. In reverse bias, the diode blocks the current flow.

Detailed Application Field Plans

The 1N4481US is widely used in power supplies, battery chargers, lighting circuits, and other electronic equipment where AC to DC conversion is required.

Detailed and Complete Alternative Models

  • 1N4001
  • 1N4002
  • 1N4003
  • 1N4004

In conclusion, the 1N4481US rectifier diode is a crucial component in electronic circuits, providing efficient AC to DC conversion with its fast switching speed and high reliability. Its use spans across various applications such as power supplies, battery chargers, and lighting circuits. While it offers advantages such as efficient conversion and fast response time, it is important to consider its limitations, including sensitivity to temperature variations and limited reverse voltage tolerance. Additionally, alternative models such as the 1N400x series can be considered based on specific application requirements.

Liste 10 perguntas e respostas comuns relacionadas à aplicação de 1N4481US em soluções técnicas

  1. What is 1N4481US and what is its application?

    • 1N4481US is a high-reliability, ultra-fast rectifier diode commonly used in power supply circuits, inverters, and other electronic applications where fast switching and high efficiency are required.

  2. What are the key specifications of 1N4481US?

    • The key specifications include a maximum repetitive reverse voltage of 200V, average forward current of 1A, and a fast recovery time.

  3. How does 1N4481US compare to other rectifier diodes in terms of performance?

    • 1N4481US offers superior performance in terms of fast recovery time, low forward voltage drop, and high reliability compared to standard rectifier diodes.

  4. Can 1N4481US be used in high-frequency applications?

    • Yes, 1N4481US is suitable for high-frequency applications due to its ultra-fast recovery time and low junction capacitance.

  5. What are the typical applications of 1N4481US in technical solutions?

    • Typical applications include AC/DC converters, switch-mode power supplies, motor drives, and snubber circuits.

  6. Does 1N4481US require any special heat management considerations?

    • While 1N4481US has low forward voltage drop and low power dissipation, it is recommended to consider thermal management in high-power applications to ensure optimal performance and reliability.

  7. Are there any specific soldering or mounting requirements for 1N4481US?

    • Standard industry practices for soldering and mounting electronic components apply to 1N4481US. It is important to follow the manufacturer's recommendations for proper handling and assembly.

  8. What are the environmental and reliability ratings for 1N4481US?

    • 1N4481US is designed to meet high-reliability standards and may have environmental ratings such as moisture sensitivity level (MSL) and compliance with RoHS directives.

  9. Can 1N4481US be used in automotive or aerospace applications?

    • Yes, 1N4481US is suitable for automotive and aerospace applications that require high reliability and performance under harsh operating conditions.

  10. Where can I find detailed technical information and application notes for 1N4481US?

    • Detailed technical information, application notes, and specifications for 1N4481US can be found in the datasheet provided by the manufacturer or distributor, as well as in relevant technical literature and online resources.