Category: Integrated Circuit (IC)
Use: The BR24C02-RDW6TP is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) IC. It is commonly used for non-volatile data storage in various electronic devices.
Characteristics: - Low power consumption - High reliability - Small form factor - Wide operating voltage range - I2C interface compatibility
Package: The BR24C02-RDW6TP is available in a small 8-pin SOP (Small Outline Package) with a thermal pad for efficient heat dissipation.
Essence: This IC is designed to provide reliable and non-volatile memory storage for electronic devices, ensuring data integrity even during power loss or system shutdown.
Packaging/Quantity: The BR24C02-RDW6TP is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The BR24C02-RDW6TP has the following pin configuration:
| Pin Name | Function | |----------|----------| | VCC | Power Supply Voltage | | GND | Ground | | SDA | Serial Data Input/Output | | SCL | Serial Clock Input | | WP | Write Protect (optional) | | A0, A1 | Device Address Selection |
Advantages: - Low power consumption - Small form factor - Wide operating voltage range - High reliability
Disadvantages: - Limited memory capacity (2 kilobits)
The BR24C02-RDW6TP utilizes EEPROM technology to store data. It employs a floating gate transistor structure that allows for non-volatile storage of information even when power is removed. The I2C interface enables communication between the IC and the controlling device, facilitating read and write operations.
The BR24C02-RDW6TP finds applications in various electronic devices, including but not limited to: - Consumer electronics (e.g., TVs, set-top boxes) - Automotive systems (e.g., infotainment, engine control units) - Industrial equipment (e.g., sensors, control systems) - Medical devices (e.g., patient monitoring, diagnostic equipment)
These alternative models offer different memory capacities and features, providing flexibility for specific application requirements.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of BR24C02-RDW6TP in technical solutions:
Q: What is BR24C02-RDW6TP? A: BR24C02-RDW6TP is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by a particular company.
Q: What is the capacity of BR24C02-RDW6TP? A: The BR24C02-RDW6TP has a capacity of 2 kilobits, which is equivalent to 256 bytes.
Q: What is the operating voltage range for BR24C02-RDW6TP? A: The operating voltage range for BR24C02-RDW6TP is typically between 1.7V and 5.5V.
Q: Can BR24C02-RDW6TP be used in automotive applications? A: Yes, BR24C02-RDW6TP is designed to meet the requirements of automotive applications and can withstand harsh environmental conditions.
Q: What is the maximum clock frequency supported by BR24C02-RDW6TP? A: BR24C02-RDW6TP supports a maximum clock frequency of 400 kHz.
Q: Does BR24C02-RDW6TP have built-in write protection? A: Yes, BR24C02-RDW6TP features a built-in write protection mechanism that allows you to protect specific memory areas from being overwritten.
Q: Can BR24C02-RDW6TP operate at high temperatures? A: Yes, BR24C02-RDW6TP is designed to operate reliably at high temperatures, making it suitable for industrial and automotive applications.
Q: What is the typical data retention time for BR24C02-RDW6TP? A: The typical data retention time for BR24C02-RDW6TP is 200 years, ensuring long-term reliability of stored data.
Q: Can BR24C02-RDW6TP be used in I2C bus systems? A: Yes, BR24C02-RDW6TP is compatible with I2C (Inter-Integrated Circuit) bus systems and can be easily integrated into such setups.
Q: Is BR24C02-RDW6TP RoHS compliant? A: Yes, BR24C02-RDW6TP is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring it meets environmental standards.
Please note that the answers provided here are general and may vary depending on the specific datasheet and technical documentation for BR24C02-RDW6TP.