ON Semiconductor
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
NZL5V6ATT1
Ver detalhes DataSheets

NZL5V6ATT1 Product Overview

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low dropout, high accuracy, low quiescent current
  • Package: TO-220, TO-263, D2PAK
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Typically available in reels of 250 or 1000 units

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.2V to 20V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 300mV at 1A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. ADJ (Adjust)

Functional Features

  • Low Dropout: Allows for regulation with minimal voltage difference between input and output.
  • High Accuracy: Provides precise output voltage regulation.
  • Low Quiescent Current: Minimizes power consumption in standby mode.

Advantages and Disadvantages

Advantages

  • High accuracy and stability
  • Low dropout voltage
  • Low power consumption

Disadvantages

  • Limited maximum output current
  • Sensitive to input voltage fluctuations

Working Principles

The NZL5V6ATT1 utilizes a feedback control loop to compare the output voltage to a reference voltage, adjusting the pass element to maintain a stable output despite variations in input voltage and load conditions.

Detailed Application Field Plans

  • Battery-powered devices
  • Portable electronics
  • Automotive applications
  • Industrial control systems

Detailed and Complete Alternative Models

  1. LM1117
  2. LT1763
  3. L78xx series

In conclusion, the NZL5V6ATT1 is a versatile voltage regulator IC with a wide input voltage range, making it suitable for various applications where stable and accurate voltage regulation is essential.

[Word Count: 310]

Liste 10 perguntas e respostas comuns relacionadas à aplicação de NZL5V6ATT1 em soluções técnicas

Sure, here are 10 common questions and answers related to the application of NZL5V6ATT1 in technical solutions:

  1. What is NZL5V6ATT1?

    • NZL5V6ATT1 is a type of voltage regulator diode used for stabilizing voltage in electronic circuits.

  2. What is the maximum input voltage for NZL5V6ATT1?

    • The maximum input voltage for NZL5V6ATT1 is typically around 6.8V.

  3. What is the output voltage range of NZL5V6ATT1?

    • The output voltage range of NZL5V6ATT1 is approximately 5.6V.

  4. How does NZL5V6ATT1 regulate voltage?

    • NZL5V6ATT1 regulates voltage by maintaining a constant output voltage despite changes in input voltage or load conditions.

  5. What are the typical applications of NZL5V6ATT1?

    • NZL5V6ATT1 is commonly used in power management circuits, voltage stabilization in electronic devices, and as a reference voltage source.

  6. What is the current rating of NZL5V6ATT1?

    • The current rating of NZL5V6ATT1 is usually around 100mA.

  7. Can NZL5V6ATT1 be used in automotive electronics?

    • Yes, NZL5V6ATT1 can be used in automotive electronics for voltage regulation and stabilization.

  8. Is NZL5V6ATT1 suitable for battery-powered devices?

    • Yes, NZL5V6ATT1 is suitable for battery-powered devices due to its low power consumption and stable voltage output.

  9. Does NZL5V6ATT1 require external components for operation?

    • NZL5V6ATT1 may require external capacitors for stability and noise reduction in certain applications.

  10. What are the temperature specifications for NZL5V6ATT1?

    • NZL5V6ATT1 typically operates within a temperature range of -40°C to 125°C, making it suitable for a wide range of environments.

I hope these questions and answers provide a good overview of the application of NZL5V6ATT1 in technical solutions! If you have any more specific questions, feel free to ask.