MC10EP51DTR2G

Product Overview

• Category: Integrated Circuit
• Use: Signal Processing
• Characteristics: High-speed, Low-power, Differential Receiver
• Package: TSSOP-8
• Essence: The MC10EP51DTR2G is a high-performance differential receiver designed for signal processing applications.
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 3.0V to 5.5V
• Input Voltage Range: -2.0V to VCC + 2.0V
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay: 400ps (typical)
• Output Skew: 50ps (typical)
• Input Resistance: 100Ω (differential)
• Output Current: ±24mA

Pin Configuration

The MC10EP51DTR2G has a total of 8 pins arranged as follows:

___________ | | 1 | | 8 |___________|

1. IN-
2. IN+
3. GND
4. VCC
5. Q
6. /Q
7. /EN
8. EN

Functional Features

• High-speed operation: The MC10EP51DTR2G can process signals at high frequencies, making it suitable for applications requiring fast data transmission.
• Low-power consumption: This differential receiver is designed to minimize power consumption, making it ideal for battery-powered devices or energy-efficient systems.
• Differential input: The device accepts differential input signals, allowing for noise rejection and improved signal integrity.
• Enable/Disable functionality: The /EN and EN pins provide control over the receiver's operation, allowing it to be easily enabled or disabled as needed.

Advantages and Disadvantages

Advantages: - High-speed operation enables fast data processing. - Low-power consumption extends battery life in portable devices. - Differential input improves noise immunity. - Enable/Disable functionality provides flexibility in system design.

Disadvantages: - Limited operating temperature range (-40°C to +85°C). - Requires external power supply (3.0V to 5.5V).

Working Principles

The MC10EP51DTR2G operates by receiving differential input signals through the IN+ and IN- pins. These signals are then processed internally to provide a single-ended output on the Q pin. The /Q pin provides the complementary output. The device can be enabled or disabled using the /EN and EN pins, respectively.

Detailed Application Field Plans

The MC10EP51DTR2G is commonly used in various applications, including:

1. Communication Systems: The high-speed and low-power characteristics of this receiver make it suitable for use in communication systems, such as Ethernet or fiber optic networks.
2. Data Transmission: It can be employed in high-speed data transmission systems, ensuring reliable signal reception and processing.
3. Industrial Automation: The device finds application in industrial automation systems where high-speed signal processing is required.
4. Test and Measurement Equipment: Its high-speed operation and low-power consumption make it ideal for use in test and measurement equipment, providing accurate and efficient signal analysis.

Alternative Models

• MC100EP51DTR2G
• MC100EP51MNR4G
• MC100EP51MNTG
• MC100EP51DTG
• MC100EP51MNG

These alternative models offer similar functionality and performance to the MC10EP51DTR2G and can be considered as substitutes depending on specific requirements.

In conclusion, the MC10EP51DTR2G is a high-performance differential receiver designed for signal processing applications. Its high-speed operation, low-power consumption, and differential input make it suitable for various communication, data transmission, industrial automation, and test and measurement applications.