NXP USA Inc.
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
MMA5206NDIKGWR2

MMA5206NDIKGWR2

Product Overview

Category

The MMA5206NDIKGWR2 belongs to the category of motion sensors.

Use

It is used for detecting and measuring motion and orientation in various electronic devices.

Characteristics

  • High sensitivity
  • Low power consumption
  • Small form factor
  • Digital output

Package

The MMA5206NDIKGWR2 comes in a small surface-mount package.

Essence

This sensor is essential for enabling motion detection and orientation sensing in electronic devices.

Packaging/Quantity

The sensor is typically packaged in reels and is available in varying quantities based on customer requirements.

Specifications

  • Operating Voltage: 1.71V to 3.6V
  • Sensing Range: ±2g, ±4g, ±8g, ±16g
  • Output Resolution: 14-bit
  • Interface: I2C/SPI
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The MMA5206NDIKGWR2 has a total of 12 pins, including power supply, ground, and communication interface pins. The detailed pin configuration is as follows: 1. VDD: Power supply 2. GND: Ground 3. SDA: I2C data line 4. SCL: I2C clock line 5. INT1: Interrupt output 6. INT2: Interrupt output 7. CS: Chip select (SPI mode) 8. SA0: I2C address selection 9. XOUT: X-axis output 10. YOUT: Y-axis output 11. ZOUT: Z-axis output 12. NC: No connection

Functional Features

  • Motion detection
  • Orientation sensing
  • Low-power mode
  • Interrupt functionality

Advantages

  • High sensitivity allows for precise motion detection
  • Low power consumption extends battery life in portable devices
  • Small form factor enables integration into compact designs
  • Digital output simplifies interfacing with microcontrollers

Disadvantages

  • Limited sensing range compared to some other motion sensors
  • Requires careful calibration for accurate orientation sensing

Working Principles

The MMA5206NDIKGWR2 operates based on the principles of capacitive micro-machined accelerometer (MEMS) technology. It measures changes in capacitance due to motion and orientation, converting them into digital signals for processing.

Detailed Application Field Plans

The MMA5206NDIKGWR2 is suitable for a wide range of applications, including: - Mobile devices - Wearable fitness trackers - Gaming controllers - Industrial equipment - Robotics

Detailed and Complete Alternative Models

Some alternative models to the MMA5206NDIKGWR2 include: - MMA8452Q - LIS3DH - ADXL345 - BMA250E

In conclusion, the MMA5206NDIKGWR2 is a versatile motion sensor with high sensitivity and low power consumption, making it suitable for various electronic applications.

[Word count: 409]

Liste 10 perguntas e respostas comuns relacionadas à aplicação de MMA5206NDIKGWR2 em soluções técnicas

  1. What is the MMA5206NDIKGWR2?

    • The MMA5206NDIKGWR2 is a high-performance, low-power, digital-output accelerometer with a 3-axis capacitive micromachined accelerometer (MEMS) sensor.

  2. What are the key features of the MMA5206NDIKGWR2?

    • Key features include low power consumption, high sensitivity, wide operating voltage range, and a digital output interface.

  3. How can the MMA5206NDIKGWR2 be used in technical solutions?

    • It can be used for motion detection, tilt sensing, vibration monitoring, and orientation detection in various applications such as industrial equipment, consumer electronics, and automotive systems.

  4. What is the operating voltage range of the MMA5206NDIKGWR2?

    • The operating voltage range is typically between 1.95V and 3.6V.

  5. What communication interfaces does the MMA5206NDIKGWR2 support?

    • It supports I2C and SPI digital communication interfaces for easy integration into different systems.

  6. What is the resolution of the MMA5206NDIKGWR2?

    • The resolution is up to 14 bits, providing accurate measurement capabilities.

  7. Can the MMA5206NDIKGWR2 withstand harsh environmental conditions?

    • Yes, it is designed to operate reliably in harsh environments, making it suitable for industrial and automotive applications.

  8. Does the MMA5206NDIKGWR2 have built-in self-test capabilities?

    • Yes, it includes built-in self-test functionality to verify the performance and reliability of the sensor.

  9. What are the typical power consumption characteristics of the MMA5206NDIKGWR2?

    • It has low power consumption, making it suitable for battery-powered devices and energy-efficient applications.

  10. Is the MMA5206NDIKGWR2 RoHS compliant?

    • Yes, it is RoHS compliant, ensuring that it meets environmental standards for hazardous substance restrictions.