Veja as especificações para detalhes do produto.
NJM2595M# - English Editing Encyclopedia Entry
Product Overview
Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: - High efficiency - Low dropout voltage - Wide input voltage range - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection
Package: SOP-8 (Small Outline Package)
Essence: The NJM2595M# is a voltage regulator IC that provides stable and regulated output voltage for various electronic devices.
Packaging/Quantity: Available in reels of 2,500 pieces per reel.
Specifications
- Input Voltage Range: 4.5V to 40V
- Output Voltage Range: 1.2V to 37V
- Output Current: Up to 1.5A
- Dropout Voltage: 0.5V typical at 1A load
- Line Regulation: ±0.2% typical
- Load Regulation: ±0.4% typical
- Quiescent Current: 10mA typical
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The NJM2595M# has the following pin configuration:
___________
| |
IN |1 8| VOUT
ADJ|2 7| GND
EN |3 6| NC
BP |4 5| FB
|___________|
- IN: Input voltage pin.
- ADJ: Adjust pin for setting the desired output voltage.
- EN: Enable pin for turning the regulator on/off.
- BP: Bypass pin for connecting an external capacitor to improve transient response.
- FB: Feedback pin for regulating the output voltage.
- NC: No connection pin.
- GND: Ground pin.
- VOUT: Output voltage pin.
Functional Features
- High efficiency conversion of input voltage to regulated output voltage.
- Adjustable output voltage allows customization for specific applications.
- Overcurrent protection safeguards the IC and connected devices from excessive current.
- Thermal shutdown protection prevents overheating and damage to the IC.
- Wide input voltage range enables compatibility with various power sources.
Advantages and Disadvantages
Advantages: - High efficiency results in minimal power loss. - Low dropout voltage ensures stable output even with low input voltage. - Wide input voltage range provides flexibility in power source selection. - Overcurrent and thermal shutdown protection enhance reliability and safety.
Disadvantages: - Limited maximum output current of 1.5A may not be suitable for high-power applications. - SOP-8 package may require additional space on the PCB compared to smaller packages.
Working Principles
The NJM2595M# operates as a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The adjustable output voltage is set using an external resistor connected to the ADJ pin. The IC also incorporates overcurrent and thermal shutdown protection to ensure safe operation.
Detailed Application Field Plans
The NJM2595M# can be used in various applications, including but not limited to: - Power supplies for consumer electronics - Battery-powered devices - Automotive electronics - Industrial control systems - LED lighting systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the NJM2595M# include: - LM317: Adjustable voltage regulator with higher output current capability. - LT1084: Low dropout voltage regulator with adjustable output voltage. - LM7805: Fixed output voltage regulator with 5V output.
These alternative models can be considered based on specific requirements and application needs.
Word count: 446 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de NJM2595M# em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of NJM2595M# in technical solutions:
Q: What is NJM2595M#? A: NJM2595M# is a voltage regulator IC (integrated circuit) commonly used in electronic circuits to regulate and stabilize voltage levels.
Q: What is the input voltage range of NJM2595M#? A: The input voltage range of NJM2595M# is typically between 4.5V and 40V.
Q: What is the output voltage range of NJM2595M#? A: The output voltage range of NJM2595M# can be adjusted from 1.2V to 37V, depending on the specific configuration.
Q: How much current can NJM2595M# handle? A: NJM2595M# can handle a maximum output current of up to 1.5A, making it suitable for various low to medium power applications.
Q: Is NJM2595M# suitable for battery-powered applications? A: Yes, NJM2595M# is often used in battery-powered applications due to its low dropout voltage and efficient power conversion capabilities.
Q: Can NJM2595M# be used as a step-up (boost) converter? A: No, NJM2595M# is a step-down (buck) converter, meaning it can only reduce the input voltage to a lower output voltage.
Q: Does NJM2595M# require any external components for operation? A: Yes, NJM2595M# requires a few external components such as input/output capacitors, resistors, and an inductor for proper operation.
Q: What is the efficiency of NJM2595M#? A: The efficiency of NJM2595M# can reach up to 90% or higher, depending on the input/output voltage differentials and load conditions.
Q: Can NJM2595M# handle thermal overload protection? A: Yes, NJM2595M# incorporates built-in thermal shutdown and current limit protection features to prevent damage from excessive heat or current.
Q: What are some typical applications of NJM2595M#? A: NJM2595M# is commonly used in various applications such as power supplies, battery chargers, LED lighting, automotive electronics, and portable devices.
Please note that the specific details and characteristics of NJM2595M# may vary, so it's always recommended to refer to the datasheet and application notes for accurate information.