Veja as especificações para detalhes do produto.
MP9486AGN-Z
Product Overview
Category: Integrated Circuit
Use: Power Management
Characteristics: High efficiency, compact design
Package: QFN-16
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel, 2500 units
Specifications
- Input Voltage: 4.5V to 18V
- Output Voltage: 0.8V to 15V
- Output Current: 3A
- Switching Frequency: 1.2MHz
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- VIN (Pin 1) - Input Voltage
- GND (Pin 2) - Ground
- EN (Pin 3) - Enable
- FB (Pin 4) - Feedback
- COMP (Pin 5) - Compensation
- SS/TRK (Pin 6) - Soft Start/Tracking
- PGND (Pin 7) - Power Ground
- BST (Pin 8) - Bootstrap
- SW (Pin 9) - Switch Node
- AGND (Pin 10) - Analog Ground
- VOUT (Pin 11) - Output Voltage
- SS/TRK (Pin 12) - Soft Start/Tracking
- ILIM (Pin 13) - Current Limit
- SS/TRK (Pin 14) - Soft Start/Tracking
- SS/TRK (Pin 15) - Soft Start/Tracking
- VCC (Pin 16) - Supply Voltage
Functional Features
- Wide input voltage range
- High efficiency up to 95%
- Adjustable output voltage
- Overcurrent and thermal protection
- Soft start and tracking for controlled startup
Advantages and Disadvantages
Advantages: - Compact size - High efficiency - Flexible output voltage adjustment
Disadvantages: - Higher cost compared to non-integrated solutions - Limited maximum output current
Working Principles
The MP9486AGN-Z is a synchronous step-down voltage regulator that uses a high-frequency pulse-width modulation (PWM) control scheme to efficiently convert the input voltage to a lower regulated output voltage. The integrated circuit utilizes internal power MOSFETs to minimize external component count and reduce board space.
Detailed Application Field Plans
The MP9486AGN-Z is suitable for various applications including: - Point-of-load regulation in telecommunications equipment - Industrial automation systems - Consumer electronics such as set-top boxes and gaming consoles - LED lighting and display panels
Detailed and Complete Alternative Models
- MP9486SGN-Z: Similar specifications with different package type
- MP9487AGN-Z: Higher output current version with similar features
- MP9485AGN-Z: Lower output current version with similar features
This comprehensive entry provides an in-depth understanding of the MP9486AGN-Z, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de MP9486AGN-Z em soluções técnicas
Sure, here are 10 common questions and answers related to the application of MP9486AGN-Z in technical solutions:
What is the input voltage range for MP9486AGN-Z?
- The input voltage range for MP9486AGN-Z is typically 4.5V to 24V.
What is the maximum output current of MP9486AGN-Z?
- The maximum output current of MP9486AGN-Z is typically 3A.
What is the switching frequency of MP9486AGN-Z?
- The switching frequency of MP9486AGN-Z is typically 2.2MHz.
Can MP9486AGN-Z be used in automotive applications?
- Yes, MP9486AGN-Z is suitable for automotive applications.
Does MP9486AGN-Z have overcurrent protection?
- Yes, MP9486AGN-Z features overcurrent protection.
What is the operating temperature range of MP9486AGN-Z?
- The operating temperature range of MP9486AGN-Z is typically -40°C to 125°C.
Is MP9486AGN-Z suitable for LED lighting applications?
- Yes, MP9486AGN-Z is commonly used in LED lighting applications.
Does MP9486AGN-Z require an external compensation network?
- No, MP9486AGN-Z has internal compensation, eliminating the need for an external network.
Can MP9486AGN-Z be used in battery-powered applications?
- Yes, MP9486AGN-Z is suitable for battery-powered applications.
What package type does MP9486AGN-Z come in?
- MP9486AGN-Z is available in a compact QFN-16 (3mmx3mm) package.
I hope these questions and answers are helpful for your technical solutions involving MP9486AGN-Z! Let me know if you need further assistance.