Veja as especificações para detalhes do produto.
MV2N4861
Product Overview
Category
MV2N4861 belongs to the category of integrated circuits (ICs).
Use
It is commonly used as a voltage regulator in electronic circuits.
Characteristics
- MV2N4861 is a low dropout voltage regulator with high output voltage accuracy.
- It has a compact package and is suitable for various electronic applications.
- The device offers excellent line and load regulation.
Package
MV2N4861 is available in a small outline transistor (SOT-23) package.
Essence
The essence of MV2N4861 lies in its ability to provide stable and regulated voltage output for electronic devices.
Packaging/Quantity
The MV2N4861 is typically packaged in reels containing 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 200mV at 150mA
- Maximum Output Current: 150mA
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The MV2N4861 has three pins: 1. Input (VIN): This pin is used to connect the input voltage. 2. Ground (GND): This pin is connected to the ground reference. 3. Output (VOUT): The regulated output voltage is obtained from this pin.
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
- Reverse battery protection
Advantages
- Small package size
- Low dropout voltage
- Wide input voltage range
- Excellent line and load regulation
Disadvantages
- Limited maximum output current
- Higher quiescent current compared to some alternatives
Working Principles
MV2N4861 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage, even with variations in input voltage and load conditions.
Detailed Application Field Plans
MV2N4861 is widely used in portable electronic devices, battery-powered systems, and other applications requiring a stable and regulated power supply. It is commonly employed in handheld consumer electronics, IoT devices, and battery management systems.
Detailed and Complete Alternative Models
Some alternative models to MV2N4861 include: - LM1117 - MCP1700 - AP2112
These alternatives offer similar functionality and are often chosen based on specific application requirements and cost considerations.
This content provides a comprehensive overview of MV2N4861, covering its product details, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de MV2N4861 em soluções técnicas
What is MV2N4861?
- MV2N4861 is a high-speed, low-power dual operational amplifier designed for use in a wide range of applications.
What are the key features of MV2N4861?
- The key features include low input bias and offset currents, low input noise voltage, wide bandwidth, and low power consumption.
In what technical solutions can MV2N4861 be used?
- MV2N4861 can be used in audio amplifiers, active filters, instrumentation amplifiers, and sensor signal conditioning circuits.
What is the typical supply voltage range for MV2N4861?
- The typical supply voltage range is +/- 5V to +/- 15V.
What is the input offset voltage of MV2N4861?
- The input offset voltage is typically 1mV.
What is the maximum operating temperature for MV2N4861?
- The maximum operating temperature is typically 125°C.
Can MV2N4861 be used in single-supply applications?
- Yes, MV2N4861 can be used in single-supply applications with proper biasing.
What is the recommended output load for MV2N4861?
- The recommended output load is 2kΩ in parallel with 100pF.
Does MV2N4861 have short-circuit protection?
- Yes, MV2N4861 has built-in short-circuit protection.
Is MV2N4861 RoHS compliant?
- Yes, MV2N4861 is RoHS compliant, making it suitable for environmentally sensitive applications.