Category: Memory Module
Use: This product is a high-speed, low-power DDR3 SDRAM memory module.
Characteristics: It offers fast data transfer rates, low power consumption, and high reliability.
Package: The MT41K64M16TW-107 AAT:J comes in a small form factor package.
Essence: It provides efficient and reliable memory storage for various electronic devices.
Packaging/Quantity: Each package contains one MT41K64M16TW-107 AAT:J memory module.
The MT41K64M16TW-107 AAT:J memory module has a total of 240 pins. These pins are arranged in a specific configuration to ensure proper connectivity with the host device. Please refer to the datasheet or user manual for the detailed pin configuration diagram.
Advantages: - Fast data transfer rates - Low power consumption - High reliability
Disadvantages: - Limited capacity (1GB) - Limited compatibility with older devices
The MT41K64M16TW-107 AAT:J memory module works by storing and retrieving data using DDR3 SDRAM technology. When the host device sends a read or write command, the memory controller accesses the required data from the memory cells within the module. The data is then transferred to or from the host device through the interface.
The MT41K64M16TW-107 AAT:J memory module is widely used in various electronic devices that require high-speed and reliable memory storage. Some common application fields include:
These alternative models provide options for users who require higher capacity or faster memory modules.
Note: The above information is based on the available data at the time of writing and may be subject to change. Please refer to the manufacturer's documentation for the most up-to-date specifications.
Sure! Here are 10 common questions and answers related to the application of MT41K64M16TW-107 AAT:J in technical solutions:
Question: What is the capacity of the MT41K64M16TW-107 AAT:J memory module?
Answer: The MT41K64M16TW-107 AAT:J has a capacity of 8 gigabytes (GB).
Question: What is the speed rating of this memory module?
Answer: The MT41K64M16TW-107 AAT:J operates at a speed of 107 megatransfers per second (MT/s).
Question: Is the MT41K64M16TW-107 AAT:J compatible with DDR3 or DDR4 systems?
Answer: The MT41K64M16TW-107 AAT:J is compatible with DDR3 systems.
Question: Can I use multiple MT41K64M16TW-107 AAT:J modules together for increased memory capacity?
Answer: Yes, you can use multiple modules to increase the overall memory capacity in your system.
Question: What is the voltage requirement for the MT41K64M16TW-107 AAT:J?
Answer: The MT41K64M16TW-107 AAT:J operates at a voltage of 1.35 volts.
Question: Does this memory module support ECC (Error Correction Code)?
Answer: Yes, the MT41K64M16TW-107 AAT:J supports ECC for error detection and correction.
Question: What is the operating temperature range for the MT41K64M16TW-107 AAT:J?
Answer: The MT41K64M16TW-107 AAT:J has an operating temperature range of -40°C to +85°C.
Question: Can I use this memory module in industrial applications?
Answer: Yes, the MT41K64M16TW-107 AAT:J is suitable for use in industrial applications due to its wide temperature range and reliability.
Question: Is the MT41K64M16TW-107 AAT:J compatible with both 32-bit and 64-bit systems?
Answer: Yes, the MT41K64M16TW-107 AAT:J is compatible with both 32-bit and 64-bit systems.
Question: What is the form factor of the MT41K64M16TW-107 AAT:J memory module?
Answer: The MT41K64M16TW-107 AAT:J follows the standard DDR3 SDRAM DIMM form factor.
Please note that these answers are based on general information about the MT41K64M16TW-107 AAT:J memory module. For specific technical details and compatibility, it's always recommended to refer to the manufacturer's documentation or consult with a technical expert.