M25P40-VMP6TG/TS TR

Basic Information Overview

• Category: Flash Memory
• Use: Non-volatile storage for electronic devices
• Characteristics:
  • High-speed data transfer
  • Low power consumption
  • Small form factor
• Package: SOP8 (Small Outline Package)
• Essence: Serial NOR Flash Memory
• Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

• Memory Size: 4 Megabits (512 Kbytes)
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage: 2.7V to 3.6V
• Operating Temperature Range: -40°C to +85°C
• Erase/Program Time: 4ms/1.5ms (typical)
• Data Retention: 20 years (typical)

Detailed Pin Configuration

The M25P40-VMP6TG/TS TR has a total of 8 pins in the SOP8 package. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | CS | Chip Select | | 2 | DO | Data Output | | 3 | WP | Write Protect | | 4 | GND | Ground | | 5 | DI | Data Input | | 6 | CLK | Clock Input | | 7 | HOLD | Hold Input | | 8 | VCC | Power Supply |

Functional Features

• High-speed read and write operations
• Sector erase and byte/page program operations
• Software and hardware protection mechanisms
• Deep power-down mode for low-power operation
• Flexible architecture with multiple sectors

Advantages and Disadvantages

Advantages

• Fast data transfer rate
• Low power consumption
• Small form factor for space-constrained designs
• High reliability and long data retention

Disadvantages

• Limited storage capacity compared to other memory types
• Relatively higher cost per unit of storage

Working Principles

The M25P40-VMP6TG/TS TR is based on the Serial Peripheral Interface (SPI) protocol. It uses a NOR flash memory architecture, which allows for random access read and write operations. The device operates by sending commands and data through the SPI interface, enabling efficient data transfer between the memory and the host device.

Detailed Application Field Plans

The M25P40-VMP6TG/TS TR is widely used in various electronic devices that require non-volatile storage. Some common application fields include: - Consumer electronics (e.g., smartphones, tablets, digital cameras) - Automotive systems (e.g., infotainment systems, instrument clusters) - Industrial equipment (e.g., control systems, data loggers) - Communication devices (e.g., routers, modems)

Detailed and Complete Alternative Models

• M25P16-VMP6TG/TS TR: 16 Megabits (2 Mbytes) Flash Memory with similar specifications and features.
• M25P80-VMP6TG/TS TR: 8 Megabits (1 Mbyte) Flash Memory with similar specifications and features.
• M25P128-VMP6TG/TS TR: 128 Megabits (16 Mbytes) Flash Memory with similar specifications and features.

(Note: This list is not exhaustive and there may be other alternative models available in the market.)

This entry provides an overview of the M25P40-VMP6TG/TS TR Flash Memory, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.