A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
MCP2544WFDT-E/MF

MCP2544WFDT-E/MF

Product Overview

Category

The MCP2544WFDT-E/MF belongs to the category of integrated circuits (ICs) specifically designed for automotive applications.

Use

This IC is primarily used in automotive electronic systems, particularly in the field of communication and networking. It enables reliable data transmission between various components within a vehicle.

Characteristics

  • High-speed communication: The MCP2544WFDT-E/MF supports high-speed data transfer, allowing for efficient communication between different automotive modules.
  • Robust design: This IC is built to withstand the harsh conditions typically encountered in automotive environments, ensuring reliable performance even in extreme temperatures and vibrations.
  • Low power consumption: The MCP2544WFDT-E/MF is designed to minimize power consumption, making it suitable for battery-powered automotive systems.
  • Compact package: It is available in a small form factor package, enabling easy integration into space-constrained automotive electronic systems.

Package and Quantity

The MCP2544WFDT-E/MF is offered in a surface mount package. Each package contains a single IC.

Specifications

  • Supply voltage: 2.7V to 5.5V
  • Operating temperature range: -40°C to +125°C
  • Data rate: Up to 1 Mbps
  • Number of pins: 14
  • Communication protocol: CAN (Controller Area Network)
  • ESD protection: ±8 kV (Human Body Model)

Pin Configuration

The MCP2544WFDT-E/MF features the following pin configuration:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. TXD - Transmit data
  4. RXD - Receive data
  5. WAKE - Wake-up input
  6. SCK - Serial clock
  7. CS - Chip select
  8. INT - Interrupt output
  9. NC - Not connected
  10. NC - Not connected
  11. NC - Not connected
  12. NC - Not connected
  13. NC - Not connected
  14. NC - Not connected

Functional Features

  • CAN communication: The MCP2544WFDT-E/MF supports the CAN protocol, enabling reliable and efficient data exchange between automotive modules.
  • Wake-up functionality: It features a wake-up input pin that allows the IC to be activated from a low-power sleep mode when necessary.
  • Interrupt output: The MCP2544WFDT-E/MF provides an interrupt output pin to notify the microcontroller of important events or status changes in the communication network.

Advantages and Disadvantages

Advantages

  • High-speed data transfer capability
  • Robust design for automotive applications
  • Low power consumption
  • Compact package for easy integration

Disadvantages

  • Limited number of pins for additional functionalities
  • Requires external components for complete system implementation

Working Principles

The MCP2544WFDT-E/MF operates based on the Controller Area Network (CAN) protocol. It utilizes differential signaling to transmit and receive data between different nodes in the automotive network. The IC incorporates various features such as error detection and correction mechanisms to ensure reliable communication.

Application Field Plans

The MCP2544WFDT-E/MF is widely used in various automotive applications, including:

  1. Automotive infotainment systems
  2. Engine control units (ECUs)
  3. Body control modules
  4. Advanced driver-assistance systems (ADAS)
  5. Telematics systems

Alternative Models

For those seeking alternative options, the following models can be considered:

  1. MCP2515 - A popular CAN controller with similar features but without wireless connectivity.
  2. TJA1050 - Another CAN transceiver commonly used in automotive applications.
  3. SN65HVD230 - A robust CAN transceiver suitable for harsh environments.

These alternative models provide similar functionality and can be used as substitutes for the MCP2544WFDT-E/MF in specific applications.

In conclusion, the MCP2544WFDT-E/MF is a high-performance integrated circuit designed for automotive communication networks. Its robust design, high-speed data transfer capability, and low power consumption make it an ideal choice for various automotive applications.

Liste 10 perguntas e respostas comuns relacionadas à aplicação de MCP2544WFDT-E/MF em soluções técnicas

  1. What is the operating voltage range of MCP2544WFDT-E/MF?

    • The operating voltage range of MCP2544WFDT-E/MF is 3.0V to 5.5V.
  2. What is the typical standby current consumption of MCP2544WFDT-E/MF?

    • The typical standby current consumption of MCP2544WFDT-E/MF is 10 µA.
  3. Can MCP2544WFDT-E/MF be used in automotive applications?

    • Yes, MCP2544WFDT-E/MF is suitable for automotive applications.
  4. What is the maximum data rate supported by MCP2544WFDT-E/MF?

    • The maximum data rate supported by MCP2544WFDT-E/MF is 1 Mbps.
  5. Does MCP2544WFDT-E/MF support wake-up on CAN bus activity?

    • Yes, MCP2544WFDT-E/MF supports wake-up on CAN bus activity.
  6. What is the operating temperature range of MCP2544WFDT-E/MF?

    • The operating temperature range of MCP2544WFDT-E/MF is -40°C to 125°C.
  7. Is MCP2544WFDT-E/MF compatible with ISO 11898-2 and ISO 11898-5 standards?

    • Yes, MCP2544WFDT-E/MF is compatible with ISO 11898-2 and ISO 11898-5 standards.
  8. What is the pinout configuration of MCP2544WFDT-E/MF?

    • The pinout configuration of MCP2544WFDT-E/MF includes VDD, VSS, TXD, RXD, S, and WAKE pins.
  9. Can MCP2544WFDT-E/MF be used in industrial control systems?

    • Yes, MCP2544WFDT-E/MF can be used in industrial control systems.
  10. Does MCP2544WFDT-E/MF have built-in protection features for overvoltage and undervoltage conditions?

    • Yes, MCP2544WFDT-E/MF has built-in protection features for overvoltage and undervoltage conditions.