A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
KSZ8041TL

KSZ8041TL

Product Overview

Category

KSZ8041TL belongs to the category of Ethernet Physical Layer Transceivers.

Use

It is primarily used for providing physical layer connectivity in Ethernet applications.

Characteristics

  • Supports 10/100 Mbps data rates
  • Compliant with IEEE 802.3 standards
  • Low power consumption
  • Integrated termination resistors
  • Small form factor package

Package

KSZ8041TL is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of KSZ8041TL lies in its ability to provide reliable and efficient Ethernet connectivity.

Packaging/Quantity

The product is typically packaged in reels or trays, with quantities varying based on customer requirements.

Specifications

  • Data Rates: 10/100 Mbps
  • Compliance: IEEE 802.3
  • Power Supply: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: Small form factor

Detailed Pin Configuration

The KSZ8041TL features the following pin configuration:

  1. TXD0+
  2. TXD0-
  3. TX_EN
  4. RXD0+
  5. RXD0-
  6. RX_ER
  7. CRS_DV
  8. MDIO
  9. MDC
  10. VDD33
  11. GND
  12. REF_CLK
  13. LEDA
  14. LEDB
  15. VDD18
  16. NC

Functional Features

  • Auto-negotiation support
  • LinkMD® TDR-based cable diagnostics
  • Energy Efficient Ethernet (EEE) support
  • Wake-on-LAN (WoL) functionality
  • Loopback mode for testing purposes

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Integrated termination resistors simplify design
  • Supports Energy Efficient Ethernet for reduced power consumption

Disadvantages

  • Limited to 10/100 Mbps data rates, not suitable for higher-speed applications

Working Principles

KSZ8041TL operates by receiving and transmitting Ethernet signals according to the IEEE 802.3 standards. It uses a combination of analog and digital circuitry to ensure reliable data transmission over Ethernet networks.

Detailed Application Field Plans

The KSZ8041TL is commonly used in various applications, including: - Industrial automation - Home networking - Automotive electronics - Internet of Things (IoT) devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to KSZ8041TL are: - KSZ8081MNX - KSZ8091MNX - KSZ9031RNX

These models offer similar functionality and compatibility with Ethernet applications.

In conclusion, KSZ8041TL is a versatile Ethernet Physical Layer Transceiver that provides reliable connectivity in various applications. Its low power consumption, integrated termination resistors, and support for Energy Efficient Ethernet make it an attractive choice for designers. However, its limitation to 10/100 Mbps data rates may restrict its use in high-speed applications.

Liste 10 perguntas e respostas comuns relacionadas à aplicação de KSZ8041TL em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of KSZ8041TL in technical solutions:

Q1: What is KSZ8041TL? A1: KSZ8041TL is a single-port 10/100BASE-TX/FX Ethernet physical layer transceiver (PHY) designed for use in various networking applications.

Q2: What are the key features of KSZ8041TL? A2: Some key features of KSZ8041TL include auto-negotiation, link status detection, energy-efficient Ethernet support, loopback modes, and various diagnostic capabilities.

Q3: What is the operating voltage range for KSZ8041TL? A3: KSZ8041TL operates within a voltage range of 3.0V to 3.6V.

Q4: Can KSZ8041TL be used in both full-duplex and half-duplex modes? A4: Yes, KSZ8041TL supports both full-duplex and half-duplex modes of operation.

Q5: Does KSZ8041TL support Auto-MDIX? A5: Yes, KSZ8041TL supports Auto-MDIX, which allows for automatic detection and correction of crossed or straight-through cables.

Q6: What is the maximum cable length supported by KSZ8041TL? A6: KSZ8041TL supports cable lengths up to 100 meters for both Category 5 and Category 6 cables.

Q7: Can KSZ8041TL operate in industrial temperature ranges? A7: Yes, KSZ8041TL is designed to operate in industrial temperature ranges from -40°C to +85°C.

Q8: Does KSZ8041TL support power-saving features? A8: Yes, KSZ8041TL supports energy-efficient Ethernet (EEE) and various power-saving modes to reduce power consumption.

Q9: What interfaces does KSZ8041TL support? A9: KSZ8041TL supports MII (Media Independent Interface) and RMII (Reduced Media Independent Interface) interfaces.

Q10: Is KSZ8041TL compatible with different microcontrollers and processors? A10: Yes, KSZ8041TL is compatible with a wide range of microcontrollers and processors, making it versatile for integration into various technical solutions.

Please note that these answers are general and may vary depending on the specific implementation and requirements.