Microchip Technology
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
24LC00-I/P
Ver detalhes DataSheets

24LC00-I/P

Product Overview

Category

The 24LC00-I/P belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is used for non-volatile data storage in various electronic devices, including microcontrollers, sensors, and communication modules.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • Small form factor

Package

The 24LC00-I/P is available in a DIP-8 package.

Essence

This EEPROM chip provides reliable and long-term data storage for electronic devices.

Packaging/Quantity

The 24LC00-I/P is typically sold in reels or tubes with varying quantities, depending on the supplier.

Specifications

  • Memory Capacity: 128 bits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 24LC00-I/P has the following pin configuration: 1. A0: Chip Address Input 2. A1: Chip Address Input 3. A2: Chip Address Input 4. VSS: Ground 5. SDA: Serial Data 6. SCL: Serial Clock 7. WP: Write Protect 8. VCC: Power Supply

Functional Features

  • Byte Read and Write Operations
  • Sequential Read Functionality
  • Software Write Protection
  • Self-timed Write Cycle

Advantages

  • Small footprint
  • Low power consumption
  • Wide operating voltage range
  • High write cycle endurance

Disadvantages

  • Limited storage capacity
  • Slower write speed compared to other memory technologies

Working Principles

The 24LC00-I/P operates by using an I2C interface to communicate with the host microcontroller. It stores and retrieves data through byte-level read and write operations, providing non-volatile memory storage for the connected device.

Detailed Application Field Plans

The 24LC00-I/P is commonly used in applications such as: - Sensor Calibration Data Storage - System Configuration Parameters - Firmware Update Storage - Identification and Authentication Data

Detailed and Complete Alternative Models

Some alternative models to the 24LC00-I/P include: - AT24C01C - CAT24C01 - M24C01-WMN6TP

In conclusion, the 24LC00-I/P is a versatile EEPROM chip that offers reliable non-volatile memory storage for a wide range of electronic devices. Its small form factor, low power consumption, and I2C interface make it suitable for various applications requiring data storage and retrieval.

Word Count: 394

Liste 10 perguntas e respostas comuns relacionadas à aplicação de 24LC00-I/P em soluções técnicas

  1. Question: What is the maximum clock frequency for 24LC00-I/P?
    Answer: The maximum clock frequency for 24LC00-I/P is 400 kHz.

  2. Question: What is the operating voltage range for 24LC00-I/P?
    Answer: The operating voltage range for 24LC00-I/P is 1.7V to 5.5V.

  3. Question: Can 24LC00-I/P be used in automotive applications?
    Answer: Yes, 24LC00-I/P is suitable for automotive applications.

  4. Question: What is the typical write cycle time for 24LC00-I/P?
    Answer: The typical write cycle time for 24LC00-I/P is 5 ms.

  5. Question: Is 24LC00-I/P compatible with I2C protocol?
    Answer: Yes, 24LC00-I/P is compatible with I2C protocol.

  6. Question: What is the storage temperature range for 24LC00-I/P?
    Answer: The storage temperature range for 24LC00-I/P is -40°C to +125°C.

  7. Question: Can 24LC00-I/P be used in industrial control systems?
    Answer: Yes, 24LC00-I/P is suitable for use in industrial control systems.

  8. Question: Does 24LC00-I/P have built-in write protection?
    Answer: Yes, 24LC00-I/P features built-in hardware write protection.

  9. Question: What is the maximum data transfer rate for 24LC00-I/P?
    Answer: The maximum data transfer rate for 24LC00-I/P is 100 kHz at 1.7V and 400 kHz at 5.5V.

  10. Question: Is 24LC00-I/P RoHS compliant?
    Answer: Yes, 24LC00-I/P is RoHS compliant.