Meixin Integrated
A imagem pode ser uma representação.
Veja as especificações para detalhes do produto.
MAX5971BETI+T
Ver detalhes DataSheets

MAX5971BETI+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Dissipation
  • Package: 28-Pin Thin QFN
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 3A
  • Switching Frequency: 100kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX5971BETI+T has a total of 28 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS/TRK: Soft-Start/Tracking Pin
  6. VOUT: Output Voltage
  7. PGND: Power Ground
  8. BST: Bootstrap Capacitor Connection
  9. SW: Switch Node
  10. AGND: Analog Ground
  11. COMP: Compensation Pin
  12. RT/CLK: Resistor Timing/Clock Synchronization Pin
  13. SYNC: Synchronization Pin
  14. CLKOUT: Clock Output Pin
  15. CLKIN: Clock Input Pin
  16. VCC: Supply Voltage
  17. VREF: Reference Voltage
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection
  21. NC: No Connection
  22. NC: No Connection
  23. NC: No Connection
  24. NC: No Connection
  25. NC: No Connection
  26. NC: No Connection
  27. NC: No Connection
  28. NC: No Connection

Functional Features

  • High Efficiency Power Conversion
  • Wide Input Voltage Range
  • Adjustable Output Voltage
  • Overcurrent Protection
  • Thermal Shutdown Protection
  • Soft-Start Functionality
  • Clock Synchronization Capability

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power dissipation - Wide input voltage range allows for versatile applications - Adjustable output voltage provides flexibility - Comprehensive protection features ensure system reliability - Soft-start function prevents inrush current

Disadvantages: - Limited maximum output current of 3A - Requires external components for operation - Higher cost compared to non-integrated solutions

Working Principles

The MAX5971BETI+T is a voltage regulator IC that converts an input voltage within the range of 4.5V to 60V into a regulated output voltage between 0.8V and 55V. It utilizes a switching frequency of 100kHz to 2MHz to achieve high efficiency power conversion. The IC incorporates various protection mechanisms such as overcurrent protection and thermal shutdown to safeguard the system. Additionally, it features a soft-start function to prevent excessive inrush current during startup.

Detailed Application Field Plans

The MAX5971BETI+T finds application in various fields, including but not limited to:

  1. Industrial Automation: Power management for control systems, motor drives, and sensors.
  2. Automotive Electronics: Voltage regulation for automotive lighting, infotainment systems, and engine control units.
  3. Telecommunications: Power supply for network equipment, base stations, and communication devices.
  4. Renewable Energy: Voltage conversion for solar panels, wind turbines, and energy storage systems.
  5. Consumer Electronics: Power management for smartphones, tablets, and portable devices.

Detailed and Complete Alternative Models

  1. MAX5970BETI+T: Similar specifications and features, but with a lower maximum output current of 2A.
  2. MAX5972BETI+T: Higher maximum output current of 4A, suitable for applications requiring higher power levels.
  3. MAX5973BETI+T: Dual-channel voltage regulator IC, capable of independently regulating two different output voltages.

(Note: The above alternative models are from the same product family and share similar characteristics to the MAX5971BETI+T.)

Word count: 439 words

Liste 10 perguntas e respostas comuns relacionadas à aplicação de MAX5971BETI+T em soluções técnicas

Sure! Here are 10 common questions and answers related to the application of MAX5971BETI+T in technical solutions:

Q1: What is the MAX5971BETI+T? A1: The MAX5971BETI+T is a power-over-Ethernet (PoE) controller IC that provides power and data to PoE-enabled devices.

Q2: What is the maximum power output of the MAX5971BETI+T? A2: The MAX5971BETI+T can deliver up to 25.5W of power to the connected PoE device.

Q3: Can the MAX5971BETI+T be used with both 802.3af and 802.3at compliant devices? A3: Yes, the MAX5971BETI+T is compatible with both 802.3af and 802.3at standards, making it versatile for various PoE applications.

Q4: How does the MAX5971BETI+T handle power management? A4: The MAX5971BETI+T features an integrated DC-DC converter that efficiently manages power delivery to the PoE device.

Q5: Can the MAX5971BETI+T provide power to multiple devices simultaneously? A5: Yes, the MAX5971BETI+T supports multi-port operation, allowing it to power multiple PoE devices at the same time.

Q6: Does the MAX5971BETI+T have built-in protection features? A6: Yes, the MAX5971BETI+T includes various protection mechanisms such as overcurrent, overvoltage, and thermal shutdown to ensure safe operation.

Q7: What is the input voltage range supported by the MAX5971BETI+T? A7: The MAX5971BETI+T can accept input voltages ranging from 36V to 57V.

Q8: Can the MAX5971BETI+T be used in industrial applications? A8: Yes, the MAX5971BETI+T is suitable for industrial applications as it operates over a wide temperature range and has robust protection features.

Q9: Does the MAX5971BETI+T support power classification? A9: Yes, the MAX5971BETI+T supports power classification according to the IEEE 802.3af/at standards, allowing it to negotiate power requirements with the connected device.

Q10: What package does the MAX5971BETI+T come in? A10: The MAX5971BETI+T is available in a 28-pin TQFN package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and implementation of the MAX5971BETI+T.