Veja as especificações para detalhes do produto.
MAX5956BUEE+ - English Editing Encyclopedia Entry
Product Overview
Category
The MAX5956BUEE+ belongs to the category of integrated circuits (ICs).
Use
This IC is primarily used for power management applications.
Characteristics
- The MAX5956BUEE+ is a highly efficient power management solution.
- It offers advanced features and functionality for various applications.
- This IC provides reliable and precise power control capabilities.
Package
The MAX5956BUEE+ is available in a small, surface-mount package.
Essence
The essence of the MAX5956BUEE+ lies in its ability to efficiently manage power in a wide range of applications.
Packaging/Quantity
This IC is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
The specifications of the MAX5956BUEE+ include:
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: Programmable from 0.8V to 5.5V
- Maximum Output Current: 3A
- Efficiency: Up to 95%
- Operating Temperature Range: -40°C to +85°C
- Package Type: 16-pin TSSOP
Detailed Pin Configuration
The pin configuration of the MAX5956BUEE+ is as follows:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
- FB: Feedback pin
- PGND: Power ground pin
- AGND: Analog ground pin
- SS/TRK: Soft-start/tracking pin
- SYNC: Synchronization pin
- CLK: Clock input pin
- MODE: Mode selection pin
- ISET: Current limit setting pin
- VCC: Supply voltage pin
- PG: Power good pin
- OCSET: Overcurrent protection setting pin
- SS/TRK: Soft-start/tracking pin
Functional Features
The MAX5956BUEE+ offers the following functional features:
- Wide input voltage range for versatile applications.
- Programmable output voltage for flexibility.
- High efficiency to minimize power loss.
- Overcurrent protection for enhanced safety.
- Soft-start and tracking capabilities for smooth operation.
- Synchronization option for multi-phase operation.
Advantages and Disadvantages
Advantages
- High efficiency results in reduced power consumption.
- Versatile input voltage range allows for various power sources.
- Programmable output voltage provides flexibility for different loads.
- Overcurrent protection ensures safe operation.
- Soft-start and tracking features enable smooth power transitions.
Disadvantages
- Limited maximum output current of 3A may not be suitable for high-power applications.
- The small package size may require careful handling during assembly.
Working Principles
The MAX5956BUEE+ operates based on a switching regulator topology. It utilizes a control loop to regulate the output voltage by adjusting the duty cycle of the internal switches. This enables efficient power conversion from the input voltage to the desired output voltage.
Detailed Application Field Plans
The MAX5956BUEE+ can be applied in various fields, including but not limited to:
- Industrial automation systems
- Telecommunications equipment
- Automotive electronics
- Consumer electronics
- Medical devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the MAX5956BUEE+ include:
- MAX5957BUEE+
- MAX5958BUEE+
- MAX5959BUEE+
- LT3650
- TPS54332
These alternative models can be considered based on specific application requirements and design constraints.
In conclusion, the MAX5956BUEE+ is a highly efficient power management IC that offers advanced features and functionality. With its wide input voltage range, programmable output voltage, and various protection features, it is suitable for a wide range of applications in different industries.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de MAX5956BUEE+ em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of MAX5956BUEE+ in technical solutions:
Q: What is the MAX5956BUEE+? A: The MAX5956BUEE+ is a power-over-Ethernet (PoE) controller designed for use in network devices that require power and data over a single Ethernet cable.
Q: What are the key features of the MAX5956BUEE+? A: The key features of the MAX5956BUEE+ include IEEE 802.3af/at compliance, integrated DC-DC converter, thermal protection, short-circuit protection, and support for various power management functions.
Q: How does the MAX5956BUEE+ provide power to network devices? A: The MAX5956BUEE+ uses Power Sourcing Equipment (PSE) functionality to deliver power to connected devices through the Ethernet cable.
Q: What is the maximum power output of the MAX5956BUEE+? A: The MAX5956BUEE+ can deliver up to 25.5W of power per port, which is compliant with the IEEE 802.3af/at standards.
Q: Can the MAX5956BUEE+ be used with non-PoE devices? A: Yes, the MAX5956BUEE+ can be used with both PoE and non-PoE devices. It supports automatic detection and classification of connected devices.
Q: Does the MAX5956BUEE+ support power management functions? A: Yes, the MAX5956BUEE+ supports various power management functions such as power enable/disable, power-good monitoring, and programmable current limit.
Q: Can the MAX5956BUEE+ be used in industrial applications? A: Yes, the MAX5956BUEE+ is designed to operate in a wide temperature range and can be used in industrial applications that require PoE functionality.
Q: What are the input voltage requirements for the MAX5956BUEE+? A: The MAX5956BUEE+ requires an input voltage of 36V to 57V DC.
Q: Does the MAX5956BUEE+ provide any protection features? A: Yes, the MAX5956BUEE+ includes thermal shutdown protection, short-circuit protection, and overcurrent protection to ensure safe operation.
Q: Are evaluation kits available for the MAX5956BUEE+? A: Yes, Maxim Integrated provides evaluation kits for the MAX5956BUEE+ to help developers test and evaluate its performance in their specific applications.
Please note that these questions and answers are general and may vary depending on the specific requirements and use cases of the MAX5956BUEE+ in different technical solutions.