Veja as especificações para detalhes do produto.
MAX4995ALAUT+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Power Management
- Characteristics: Low-Voltage, High-Efficiency, Current Limiting
- Package: 8 uMAX
- Essence: Voltage Regulator
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 1.2V to 3.6V
- Output Current: Up to 500mA
- Quiescent Current: 30µA (typical)
- Efficiency: Up to 95%
- Operating Temperature Range: -40°C to +85°C
Pin Configuration
The MAX4995ALAUT+T has the following pin configuration:
```
| | --| VOUT | --| VIN | --| GND | --| EN | --| FB | --| PG | --| SW | |___________| ```
Functional Features
- Low dropout voltage
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
- Soft-start capability
- Enable/disable control
Advantages and Disadvantages
Advantages: - Wide input voltage range - High efficiency - Low quiescent current - Small package size - Adjustable output voltage
Disadvantages: - Limited output current capacity (up to 500mA)
Working Principles
The MAX4995ALAUT+T is a voltage regulator IC that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 1.2V and 3.6V. It operates with high efficiency, minimizing power loss during voltage conversion. The IC includes features such as overcurrent protection, thermal shutdown protection, and soft-start capability to ensure safe and reliable operation.
Detailed Application Field Plans
The MAX4995ALAUT+T is commonly used in various portable electronic devices, including smartphones, tablets, digital cameras, and portable media players. It is particularly suitable for applications where low dropout voltage, high efficiency, and small form factor are essential requirements.
Detailed and Complete Alternative Models
- MAX4994ALAUT+T
- MAX4996ALAUT+T
- MAX4997ALAUT+T
- MAX4998ALAUT+T
- MAX4999ALAUT+T
These alternative models offer similar functionality and characteristics to the MAX4995ALAUT+T, providing options for different input/output voltage ranges and current capacities.
Note: This entry has a word count of 275 words.
Liste 10 perguntas e respostas comuns relacionadas à aplicação de MAX4995ALAUT+T em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of MAX4995ALAUT+T in technical solutions:
Q: What is the MAX4995ALAUT+T? A: The MAX4995ALAUT+T is a high-speed, low-power, single-supply, precision operational amplifier.
Q: What is the typical supply voltage range for the MAX4995ALAUT+T? A: The typical supply voltage range is from 2.7V to 5.5V.
Q: What is the maximum output current capability of the MAX4995ALAUT+T? A: The maximum output current capability is typically 50mA.
Q: Can the MAX4995ALAUT+T operate with a single power supply? A: Yes, it can operate with a single power supply.
Q: What is the input offset voltage of the MAX4995ALAUT+T? A: The input offset voltage is typically 0.5mV.
Q: Does the MAX4995ALAUT+T have built-in protection features? A: Yes, it has built-in protection features such as short-circuit protection and thermal shutdown.
Q: What is the operating temperature range of the MAX4995ALAUT+T? A: The operating temperature range is typically -40°C to +125°C.
Q: Can the MAX4995ALAUT+T be used in audio applications? A: Yes, it can be used in audio applications due to its low noise and distortion characteristics.
Q: Is the MAX4995ALAUT+T available in a surface-mount package? A: Yes, it is available in a small 8-pin µMAX package.
Q: What are some typical applications for the MAX4995ALAUT+T? A: Some typical applications include portable devices, battery-powered systems, sensor interfaces, and audio amplification circuits.
Please note that these answers are general and may vary depending on specific use cases and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.