Veja as especificações para detalhes do produto.
P0080SC Product Overview
Introduction
The P0080SC is a semiconductor product belonging to the category of transient voltage suppressor (TVS) diodes. These diodes are designed to protect sensitive electronics from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events. The P0080SC is widely used in various electronic devices and systems to ensure reliable operation and protection against voltage spikes.
Basic Information Overview
- Category: Transient Voltage Suppressor (TVS) Diode
- Use: Protection against voltage transients induced by lightning, ESD, and other transient voltage events
- Characteristics: Fast response time, low clamping voltage, high surge current capability
- Package: SMC (DO-214AB)
- Essence: Safeguarding sensitive electronics from voltage spikes
- Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier and customer requirements
Specifications
The P0080SC TVS diode typically features the following specifications: - Standoff Voltage: 6.8V - Breakdown Voltage: 7.5V - Peak Pulse Power: 500W - Operating Temperature Range: -55°C to 150°C - Compliance: RoHS and REACH compliant
Detailed Pin Configuration
The P0080SC TVS diode has a standard SMC (DO-214AB) package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Transient Voltage Suppression: Effectively clamps transient voltages to safe levels, protecting downstream components.
- Fast Response Time: Rapid reaction to transient events, minimizing the risk of damage to sensitive electronics.
- Low Clamping Voltage: Ensures that the protected circuitry is exposed to minimal voltage stress during transient events.
Advantages and Disadvantages
Advantages
- Effective protection against voltage transients
- Fast response time
- Low clamping voltage
Disadvantages
- Limited to specific voltage ranges
- May require additional circuitry for comprehensive overvoltage protection
Working Principles
The P0080SC TVS diode operates based on the principle of avalanche breakdown. When a transient voltage event occurs, the diode rapidly conducts, diverting excess current away from the protected circuitry and limiting the voltage across it.
Detailed Application Field Plans
The P0080SC TVS diode finds extensive application in various electronic systems, including but not limited to: - Consumer electronics - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies
Detailed and Complete Alternative Models
Several alternative models to the P0080SC TVS diode include: - P0080SA - P0080SB - P0080SD - P0080SE
In conclusion, the P0080SC TVS diode serves as a crucial component in safeguarding electronic systems from transient voltage events, offering fast response, low clamping voltage, and effective transient voltage suppression.
[Word Count: 430]
Liste 10 perguntas e respostas comuns relacionadas à aplicação de P0080SC em soluções técnicas
What is P0080SC?
- P0080SC is a specific model of pressure sensor commonly used in technical solutions to measure fluid pressure.
How does P0080SC work?
- P0080SC operates by converting the applied pressure into an electrical signal, which can then be interpreted by control systems or displayed on monitoring devices.
What are the typical applications of P0080SC?
- P0080SC is often used in automotive fuel systems, industrial machinery, hydraulic systems, and HVAC equipment to monitor and control fluid pressures.
What is the operating range of P0080SC?
- The operating range of P0080SC varies depending on the specific model, but it typically covers pressures from 0 to 100 psi or higher.
How accurate is P0080SC?
- P0080SC sensors are designed to provide high accuracy, often within a few percentage points of the measured pressure.
Can P0080SC be used with corrosive fluids?
- Some models of P0080SC are compatible with corrosive fluids, but it's important to check the specifications and select the appropriate sensor for the application.
What type of output signal does P0080SC produce?
- P0080SC typically produces a voltage or current output signal proportional to the measured pressure, making it compatible with various control and monitoring systems.
Is P0080SC suitable for high-temperature environments?
- Certain models of P0080SC are designed to withstand high temperatures, but it's essential to verify the temperature range for the specific sensor being used.
How should P0080SC be installed and calibrated?
- Installation and calibration procedures for P0080SC may vary, so it's crucial to follow the manufacturer's guidelines and recommendations for proper setup.
What maintenance is required for P0080SC?
- Regular inspection for damage, cleaning, and calibration checks are typical maintenance tasks for P0080SC to ensure accurate and reliable performance over time.