Veja as especificações para detalhes do produto.
LTC2955IDDB-1
Product Overview
Category
The LTC2955IDDB-1 belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for power management and control.
Characteristics
- Integrated circuit
- Power management and control functionality
- Small form factor
- Low power consumption
- High reliability
Package
The LTC2955IDDB-1 is available in a small outline, 8-pin DFN (Dual Flat No-Lead) package.
Essence
The essence of the LTC2955IDDB-1 lies in its ability to efficiently manage and control power in electronic devices, ensuring optimal performance and reliability.
Packaging/Quantity
The LTC2955IDDB-1 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.7V to 26V
- Quiescent Current: 20µA
- Operating Temperature Range: -40°C to 85°C
- Output Voltage: Programmable from 1.2V to 24V
- Power-On Reset Threshold: Adjustable from 1.2V to 24V
Detailed Pin Configuration
The LTC2955IDDB-1 features the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin
- PGOOD: Power good indicator pin
- RST: Reset pin
- ADJ: Voltage adjustment pin
- NC: No connection pin
Functional Features
- Power-on reset function ensures proper initialization of the device upon power-up.
- Programmable output voltage allows customization according to specific requirements.
- Enable pin provides control over the device's operation.
- Power good indicator pin signals the status of the output voltage.
- Reset pin allows for manual or external reset control.
- Voltage adjustment pin enables fine-tuning of the output voltage.
Advantages and Disadvantages
Advantages
- Efficient power management and control
- Small form factor for space-constrained applications
- Wide input voltage range for versatility
- Low quiescent current for power-saving operation
- Adjustable output voltage for customization
Disadvantages
- Limited output voltage range (1.2V to 24V)
- Requires additional external components for complete functionality
Working Principles
The LTC2955IDDB-1 operates by monitoring the input voltage and providing a regulated output voltage based on the programmed settings. It incorporates power-on reset functionality, enabling proper initialization upon power-up. The device can be enabled or disabled using the EN pin, and the output voltage can be adjusted using the ADJ pin. The PGOOD pin indicates the status of the output voltage, while the RST pin allows for manual or external reset control.
Detailed Application Field Plans
The LTC2955IDDB-1 finds application in various electronic devices that require efficient power management and control. Some potential application fields include:
- Portable electronic devices: Smartphones, tablets, portable gaming consoles, etc.
- Industrial automation: Control systems, sensors, actuators, etc.
- Automotive electronics: Infotainment systems, navigation units, lighting controls, etc.
- Medical devices: Patient monitors, diagnostic equipment, wearable health trackers, etc.
- Internet of Things (IoT): Connected devices, smart home automation, environmental sensors, etc.
Detailed and Complete Alternative Models
- LTC2954IDDB-1: Similar to LTC2955IDDB-1 but with a different pin configuration.
- LTC2956IDDB-1: Offers additional features such as adjustable power-on reset delay and watchdog timer functionality.
- LTC2957IDDB-1: Provides enhanced power management capabilities with integrated battery charger functionality.
These alternative models offer similar power management and control functionalities, catering to different application requirements.
Word count: 550 words
Liste 10 perguntas e respostas comuns relacionadas à aplicação de LTC2955IDDB-1 em soluções técnicas
Sure! Here are 10 common questions and answers related to the application of LTC2955IDDB-1:
Q1: What is LTC2955IDDB-1? A1: LTC2955IDDB-1 is a power supply monitor and push-button controller IC that provides a simple solution for power-up sequencing and system monitoring in technical applications.
Q2: What are the key features of LTC2955IDDB-1? A2: The key features of LTC2955IDDB-1 include undervoltage lockout, push-button control, adjustable reset timeout, power supply sequencing, and low quiescent current.
Q3: How does LTC2955IDDB-1 help with power-up sequencing? A3: LTC2955IDDB-1 allows you to define the order in which different power supplies turn on, ensuring proper initialization and avoiding potential issues caused by simultaneous power-up.
Q4: Can LTC2955IDDB-1 be used to monitor multiple power supplies? A4: Yes, LTC2955IDDB-1 can monitor up to four power supplies simultaneously, providing accurate voltage monitoring and fault detection.
Q5: How does the push-button control feature work? A5: The push-button control feature of LTC2955IDDB-1 allows you to use a single push-button switch to control the power-up and power-down sequences, simplifying user interaction.
Q6: Can I adjust the reset timeout period with LTC2955IDDB-1? A6: Yes, LTC2955IDDB-1 allows you to adjust the reset timeout period using an external capacitor, giving you flexibility in defining the duration of the reset signal.
Q7: What is the quiescent current of LTC2955IDDB-1? A7: LTC2955IDDB-1 has a low quiescent current of typically 6μA, which helps in minimizing power consumption and extending battery life.
Q8: Is LTC2955IDDB-1 suitable for battery-powered applications? A8: Yes, LTC2955IDDB-1 is suitable for battery-powered applications due to its low quiescent current and ability to monitor multiple power supplies, ensuring efficient power management.
Q9: Can I use LTC2955IDDB-1 in automotive applications? A9: Yes, LTC2955IDDB-1 is designed to operate over a wide temperature range and is suitable for automotive applications that require reliable power supply monitoring and sequencing.
Q10: Are there any application notes or reference designs available for LTC2955IDDB-1? A10: Yes, Linear Technology (now part of Analog Devices) provides application notes and reference designs that can help you understand and implement LTC2955IDDB-1 in your technical solutions.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and support.